421alkybanshee Posted July 5, 2011 Report Share Posted July 5, 2011 any info out there on the wiring for a banshee other than the clymer manual? All i want is simple, spark, and lights. Any help is appreciated. also what is the gap suppost to be for the pickup to the flywheel? Quote Link to comment Share on other sites More sharing options...
Paulie B Posted July 6, 2011 Report Share Posted July 6, 2011 any info out there on the wiring for a banshee other than the clymer manual? All i want is simple, spark, and lights. Any help is appreciated. also what is the gap suppost to be for the pickup to the flywheel? You have the wiring diagram what more do you need? Start by taking your harness off the bike and untaping the whole thing it's easy after that because alot of the stuff you don't need has a plug on it. Cut off the plugs and delete the wires leading to it. Here's a pic of my harness for shitz and giggles. Quote Link to comment Share on other sites More sharing options...
camatv Posted July 6, 2011 Report Share Posted July 6, 2011 all your going to remove is the torrs set up. unless you mount the cdi under the tank or just behind the tank and plug the stator right in to it.. there is really not much "extra" on a banshee harness Quote Link to comment Share on other sites More sharing options...
papa-smurf Posted July 6, 2011 Report Share Posted July 6, 2011 (edited) You have the wiring diagram what more do you need? Start by taking your harness off the bike and untaping the whole thing it's easy after that because alot of the stuff you don't need has a plug on it. Cut off the plugs and delete the wires leading to it. Here's a pic of my harness for shitz and giggles. If you don't mind me asking.. what is the wire forked off from the coil wires (black orange) .. key or on off switch? Are you running lights/key/on off or just strictly engine components ? Where did you cut the wires from the excess wires ... right at the cdi? Sent from my Xoom using Tapatalk Edited July 6, 2011 by papa-smurf Quote Link to comment Share on other sites More sharing options...
Paulie B Posted July 7, 2011 Report Share Posted July 7, 2011 If you don't mind me asking.. what is the wire forked off from the coil wires (black orange) .. key or on off switch? Are you running lights/key/on off or just strictly engine components ? Where did you cut the wires from the excess wires ... right at the cdi? Sent from my Xoom using Tapatalk That wire is my on/off or kill switch. I don't run a key. My brake light and main lights are self contained with a battery independent of the harness. I did wire them into the stock switch though. The low beam selector is for the brake light only and the high beam selector runs both my brake and my leds. I deleted my wires right out of the CDI. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.