J-Madd Posted August 27, 2013 Report Share Posted August 27, 2013 On the flip side "they" say the most common cause of suspected electrical issues is bad jetting. If the needle is lean in the midrange or part throttle you can sand it at the very top. We have done that to help with the lean hang on alky. It still does it if the air is good though, but runs great at the expense of more wear. This is on drag motors, may not apply as much to an every day rider. Quote Link to comment Share on other sites More sharing options...
camatv Posted August 27, 2013 Report Share Posted August 27, 2013 yikes/ Quote Link to comment Share on other sites More sharing options...
rubberneck Posted August 27, 2013 Report Share Posted August 27, 2013 on another note. i have seen SOOOOOOOOOOO many issues with motors, electrics, installation problems< contributed to bad jetting. Not sure if you are referring to me or just in general, but no, bike ran fine with 34 PJs. Only issue with the PJs was the somewhat inconsistent idle they seem to suffer from on some bikes. Was just going to get some PWKs but I wanted to try the lectrons and figured what the heck. I currently have 5-2xl in them so i guess ill call dennis and get some 5-3xl and give it a go. Quote Link to comment Share on other sites More sharing options...
bandaid Posted February 17, 2014 Report Share Posted February 17, 2014 Where can I buy this modification? Cheers Geoff (Aus) Quote Link to comment Share on other sites More sharing options...
bandaid Posted March 17, 2014 Report Share Posted March 17, 2014 Just a thanks to SRT for his quick reply on this Lectron carb mod. It is now fitted. It does everything it states and has tuned my bike to perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.