Zwiser Posted May 10, 2011 Report Share Posted May 10, 2011 When i jacked up the shee and turned the bars it pushes the a arm on that side back and the other forward and vise versa what would cause this? Bad bushings? Bent frame? Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted May 10, 2011 Report Share Posted May 10, 2011 I'm assuming you are referring to stock arms. More than likely it will be the bushings where the arms bolt to the frame. I would replace those before you do any more riding. Quote Link to comment Share on other sites More sharing options...
Zwiser Posted May 10, 2011 Author Report Share Posted May 10, 2011 Ok I don't plan on riding it for awhile anyways because the chain slider is worn down to the frame Quote Link to comment Share on other sites More sharing options...
toytech Posted May 11, 2011 Report Share Posted May 11, 2011 ebay item number 320694797173 bronze bushing kit $20 try theese Quote Link to comment Share on other sites More sharing options...
Zwiser Posted May 11, 2011 Author Report Share Posted May 11, 2011 thanks for the link... Quote Link to comment Share on other sites More sharing options...
Glenyboy Posted May 18, 2011 Report Share Posted May 18, 2011 Funny enough I was having a tinker with my banshee the other day and I had a bit of movement on the top of the upper arm, I've never messed about with an atv suspension set up before how would I know whether I need just the bushes or the whole kit with pins etc? Also I've seen different types of bushes (materials) what are the best as they are all a similar price. Thanks My suspension is all stock Quote Link to comment Share on other sites More sharing options...
Zwiser Posted May 18, 2011 Author Report Share Posted May 18, 2011 I used those bushings above and there's no more play Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted May 18, 2011 Report Share Posted May 18, 2011 Funny enough I was having a tinker with my banshee the other day and I had a bit of movement on the top of the upper arm, I've never messed about with an atv suspension set up before how would I know whether I need just the bushes or the whole kit with pins etc? Also I've seen different types of bushes (materials) what are the best as they are all a similar price. Thanks My suspension is all stock If you do a lot of riding in and around mud and water, you might want to pick up the comprehensive kit. The sleeves and bolts tend to rust, and you might have issues getting your old ones out. This kit is sold by Mattoon Machine (A BHQ Sponsor). If you have some down time, disassemble your front end, and see what parts you need, before you order anything. More than likely, if you can get your bolts and sleeves out, these bushings will be all you need. http://cgi.ebay.com/ebaymotors/320694797173?ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3Dm39%26_nkw%3D320694797173%26_fvi%3D1&_rdc=1 Quote Link to comment Share on other sites More sharing options...
Glenyboy Posted May 19, 2011 Report Share Posted May 19, 2011 Thanks a lot, I'll disassemble it all first before ordering anything then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.