jrmarquez.702 Posted May 3, 2011 Report Share Posted May 3, 2011 hey guys, i have a set of 38mm mikuni tm's and im trying to get them set up for alky. I would like to try these out, just need a little help. Im gunna try them out on a 4mil cub. here is what i need help on -main jet? -pilot jet? -needle? -needle and seat? Ive always used pwk's so im pretty lost rite now, so any advise would be great. thanks... also, rite now they have a 40 pilots, 6dp4 needles and both carbs only have one float. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted May 3, 2011 Report Share Posted May 3, 2011 dont forget your gonna need a powerjet kit. Quote Link to comment Share on other sites More sharing options...
smithers1986 Posted May 3, 2011 Report Share Posted May 3, 2011 run u some lectrons man i love mine Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted May 3, 2011 Report Share Posted May 3, 2011 you need to find mikuni people ,most around here run pwks,I just converted to alky on two bikes but with 39pwks,there is a lil involved to ensure fuel flow like drilling the carb body out,pilot circiut Quote Link to comment Share on other sites More sharing options...
jrmarquez.702 Posted May 3, 2011 Author Report Share Posted May 3, 2011 Yea, not too much mikuni love on this site...lol... I already have alky 40mm pwk's on bike, I just wanted to try something different. Hopefully someone that runs mikuni's can help me out.... Quote Link to comment Share on other sites More sharing options...
yamahaD4L Posted May 30, 2011 Report Share Posted May 30, 2011 Ive got some 35 TMs on alky. First timer on alky. Bought them as they sit other than putting a different power jet on it. Not sure about the needles or pilot cause when I dynoed it I didnt need to mess. The main I drilled out to 116 thousandths. Im running stock bore 4mill stroker. Can check and repost later. Only got 4 passes before I smoked it Sat at Silver Lake. My own fault forgot to top my tank off ran lean and most know that melt down sound. Will get bavk to you once I get back and tear them apart. Be a good reference I guess. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.