jonvia Posted April 13, 2011 Report Share Posted April 13, 2011 okay, so my damn shee is firing outta the left side wayyyy more than the right.. really smokey what could this be? Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted April 14, 2011 Report Share Posted April 14, 2011 You need to see if you are getting spark to the right cylinder. Then you need to make sure you have your jetting correct. Also was there anything that was messed with I.E. what did you mess with lol Quote Link to comment Share on other sites More sharing options...
armyvet Posted April 14, 2011 Report Share Posted April 14, 2011 check for spark,check jetting and confirm you dont have a head gasket issue Quote Link to comment Share on other sites More sharing options...
jonvia Posted April 14, 2011 Author Report Share Posted April 14, 2011 check for spark,check jetting and confirm you dont have a head gasket issue well, i have spark.. idk if this fixed the prob or not but i seen that the idle on both carbs was set wayyyy offf rom each other, so i turned the idle on both all the way in at the same time and the one side started smoking like the left side.. idk if that helped or not haha Quote Link to comment Share on other sites More sharing options...
pr0blumz Posted April 14, 2011 Report Share Posted April 14, 2011 Reeds could be bad as well Quote Link to comment Share on other sites More sharing options...
jonvia Posted April 14, 2011 Author Report Share Posted April 14, 2011 You need to see if you are getting spark to the right cylinder. Then you need to make sure you have your jetting correct. Also was there anything that was messed with I.E. what did you mess with lol haha hwat do ya mean by I.E.? Quote Link to comment Share on other sites More sharing options...
midlifecrisis Posted April 14, 2011 Report Share Posted April 14, 2011 ie means for example Quote Link to comment Share on other sites More sharing options...
jonvia Posted April 14, 2011 Author Report Share Posted April 14, 2011 ie means for example i gotcha lol, Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted April 15, 2011 Report Share Posted April 15, 2011 Idle screws should be about 1 1/2 turns out. If considerably more or less means you need different pilot jets or clean carbs. Quote Link to comment Share on other sites More sharing options...
camatv Posted April 21, 2011 Report Share Posted April 21, 2011 i think every post should start with "damn banshee" NICE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.