kwikman Posted April 8, 2011 Report Share Posted April 8, 2011 I have a 2006 banshee low hours on bike. I just got done in stalling a 4mil kit and found the clutch housing is moveing. The housing is moveing on the gear a 1/4 inch were the rivits hold it to the gear. Is this ok or do I need to replace it with a new one. Quote Link to comment Share on other sites More sharing options...
Wildcardracing Posted April 8, 2011 Report Share Posted April 8, 2011 Your basket cushions are worn. How do the fingers of the basket look? Are they getting grooved up? If so, I'd recommend you upgrade to a billet basket with some new urethane cushions. That will solve your problems. -B Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted April 8, 2011 Report Share Posted April 8, 2011 I have a 2006 banshee low hours on bike. I just got done in stalling a 4mil kit and found the clutch housing is moveing. The housing is moveing on the gear a 1/4 inch were the rivits hold it to the gear. Is this ok or do I need to replace it with a new one. 1/4 inch is way too much play in your clutch basket, the stock basket is not repairable so you need to get an aftermarket basket and install your gear on it. Quote Link to comment Share on other sites More sharing options...
acroadam Posted April 8, 2011 Report Share Posted April 8, 2011 I thought there was no cushions needed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.