SlowMoe Posted March 27, 2011 Report Share Posted March 27, 2011 Ok I need this stuff gone ASAP so new prices There are pics of some of the stuff in the other thread but I will try to upload the rest tonite Vitos fat bastards chrOme near flawless 400 shipped Stock cylinders unported with good pistons pro design studs fresh hone 225 shipped Pro design cool head with 21cc domes 125 shipped Stock head milled and rechambered I bought this from hjr 90 shipped 11 paddle sls haulers tear behind 1paddle they are tubed but tubes have held for close to 3 years so... 190 shipped Complete bottom end crank trued welded just checked still like new brand new heavy duty drag clutch billet basket cut tranny ported cases shift star mod +4 timing plate all covers new gaskets seals it is currently apart so I can soft bolt it so you can inspect it if that makes you feel better or I can assemble it for you your choice 775 shipped Marvin shaw rear shock 130 shipped + 8 swingarm comes with chain 125 shipped Boyesen pro series reeds brand new never used 75 shipped Itp holeshot rears on stock wheels painted black but paint is chipping 80% or more tread 150 shipped Stock bore cylinders good bore fresh hone 110 shipped I'll try to get pics tonite sorry if you pmed me previously I've been busy thanks for looking Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 Sorry for the crappy pictures if you need better pics of any item I will take more tomorrow.. Quote Link to comment Share on other sites More sharing options...
Rootracing Posted March 27, 2011 Report Share Posted March 27, 2011 pics of the vito pipes Quote Link to comment Share on other sites More sharing options...
Smokestack Posted March 27, 2011 Report Share Posted March 27, 2011 Not listed but the works shocks 4sale? Quote Link to comment Share on other sites More sharing options...
Nieskes Posted March 27, 2011 Report Share Posted March 27, 2011 How much for basket? and does the coolhead come with studs? Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 Shocks are sold No studs on the cool head, not ready to part the bottom end yet Pipes have 2 small dings the one in the pic is from the petcock my wife couldn't find the other one but I'm pretty sure there is one more small ding no worse than the one in the pic http://i1195.photobucket.com/albums/aa392/inspectorb/a-1.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/e.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/c-2.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/d-1.jpg Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted March 27, 2011 Report Share Posted March 27, 2011 Shocks are sold No studs on the cool head, not ready to part the bottom end yet Pipes have 2 small dings the one in the pic is from the petcock my wife couldn't find the other one but I'm pretty sure there is one more small ding no worse than the one in the pic http://i1195.photobucket.com/albums/aa392/inspectorb/a-1.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/e.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/c-2.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/d-1.jpg if you part the bottom end let me know about the cut trans and can i bet better pics of the tear in the paddles??? Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted March 27, 2011 Report Share Posted March 27, 2011 and the stock bore cyl's are they ported or no? Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 Stock bore honed not ported Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted March 27, 2011 Report Share Posted March 27, 2011 Any pics of the holeshots? Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 Stock cylinders w/o pistons ......................SOLD Stock milled rechambered head.................SOLD I would take 180 shipped for the trans. Here is a better pic of the bad spot on the paddle tire. It was like this when I bought it almost 3 years ago. It had a 10 mill cheetah engine on it at that time too. What I do is let the air out and squeeze in some RTV black. Then I air it up and let the silicone ooze out and spread the excess to protect the pucnture somewhat. That is what you see around the hole. Quote Link to comment Share on other sites More sharing options...
volcrano Posted March 27, 2011 Report Share Posted March 27, 2011 Shocks are sold No studs on the cool head, not ready to part the bottom end yet Pipes have 2 small dings the one in the pic is from the petcock my wife couldn't find the other one but I'm pretty sure there is one more small ding no worse than the one in the pic http://i1195.photobucket.com/albums/aa392/inspectorb/a-1.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/e.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/c-2.jpg http://i1195.photobucket.com/albums/aa392/inspectorb/d-1.jpg moe,how can u say near flawless pipes when they have a huge ugly dent and possibly another one?and $400????wow. Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 moe,how can u say near flawless pipes when they have a huge ugly dent and possibly another one?and $400????wow. Whoa bro easy. The dent in the pic is on the inside by the pingel. You can't see it at all when installed. Here I took some better pics here you can see the other dent isn't bad at all. Quote Link to comment Share on other sites More sharing options...
SlowMoe Posted March 27, 2011 Author Report Share Posted March 27, 2011 Any pics of the holeshots? I'll get some tonite.. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted March 27, 2011 Report Share Posted March 27, 2011 how long is the rear shaw? any pics of it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.