88banshee Posted March 23, 2011 Report Share Posted March 23, 2011 i built a chassis was going to mount my blown up motor as a mock up for the motor mounts and i looked at the frame llclimbini added to the chassis it was fine and looked good but the original chassis was cracked! and not just a lil crack! it was about 1/2in wide and 1in long so i sarted inspecting and the whole original chassis is covered in cracks so i decided to make a sand chassis for hill climbing in sand and draging in sand and dirt and possibaly driving on the road but mostly sand and dirt i would like a no suspension setup as there easier (for me) but i can do suspension up front only as i have a-arms and fox suspension but im putting a 600 in it and the front end needs to be long so the pipes will fit any ideas on what kind of setup? i would like to build the frame around the motor and so i can just drop in the good one Quote Link to comment Share on other sites More sharing options...
Turbo Chassis Posted March 23, 2011 Report Share Posted March 23, 2011 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.