mmajay Posted March 20, 2011 Report Share Posted March 20, 2011 (edited) I parted out a built blaster i built from scrap and purchased this banshee in Raleigh NC area and was wondering if anyone knows who built it so i can get the specifics of the motor internals. All i have now is speculation. This is my second banshee i have owned but i relly never learned much about them so i been trolling around looking for some info. Only info i have on this quad is its a 4 mil with 66mm blaster pistons in it with port work and thats just speculation from the guy who didnt know crap about banshees. I was hopeing someone knows or seen this here or around?? Thanx!! Hopefully the picture shows up , i aint to sure how to use the pics in this forum. [/img] Edited March 20, 2011 by mmajay Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted March 20, 2011 Report Share Posted March 20, 2011 sweet lookin bike!! Quote Link to comment Share on other sites More sharing options...
wfobasheeboy Posted March 20, 2011 Report Share Posted March 20, 2011 Mmajay That is a nice looking ride. I hope you find out your info you need. Good luck with your new ride. Quote Link to comment Share on other sites More sharing options...
madjimmax Posted March 21, 2011 Report Share Posted March 21, 2011 Definitely a sweet bike. You'll have to pull the head to see what pistons are in there, and as far as stroke just pull a plug and rest something on top of the piston and turn engine over and measure the travel of the stick, dowel, screwdriver or whatever you use. someone else hopefully will chime in with the stock travel measurement because right now I cant remember what it is exactly. Quote Link to comment Share on other sites More sharing options...
Hilarious Posted March 21, 2011 Report Share Posted March 21, 2011 Definitely a sweet bike. You'll have to pull the head to see what pistons are in there, and as far as stroke just pull a plug and rest something on top of the piston and turn engine over and measure the travel of the stick, dowel, screwdriver or whatever you use. someone else hopefully will chime in with the stock travel measurement because right now I cant remember what it is exactly. Stock stroke is 54mm Quote Link to comment Share on other sites More sharing options...
ECshee Posted March 21, 2011 Report Share Posted March 21, 2011 i just recently saw a pic of what looked to be that bike, in someones signature. same seat cover i think Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted March 24, 2011 Report Share Posted March 24, 2011 i saw it too but its a different seat... cant remember where i saw it now though i had to compare side by side. Quote Link to comment Share on other sites More sharing options...
350333 Posted March 26, 2011 Report Share Posted March 26, 2011 I parted out a built blaster i built from scrap and purchased this banshee in Raleigh NC area and was wondering if anyone knows who built it so i can get the specifics of the motor internals. All i have now is speculation. This is my second banshee i have owned but i relly never learned much about them so i been trolling around looking for some info. Only info i have on this quad is its a 4 mil with 66mm blaster pistons in it with port work and thats just speculation from the guy who didnt know crap about banshees. I was hopeing someone knows or seen this here or around?? Thanx!! Hopefully the picture shows up , i aint to sure how to use the pics in this forum. [/img] no. but it looks good. Quote Link to comment Share on other sites More sharing options...
MacRacer1 Posted March 26, 2011 Report Share Posted March 26, 2011 Hopefully someone knows who built it but I doubt it lol anyways nice bike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.