camatv Posted April 3, 2011 Report Share Posted April 3, 2011 in gas motors i use walmart brand outboard mix. its excellent. i just split a gas cub and i can take a few pics of it it looks like you pored the oil straight down the motor everything is coverd in the stuff and its been sitting all winter long.. very clean burn very clean oil and at an actual reasonable price it wont mix with alky.. i just use klotz for alky i dont like all that black goopy shit all over the place with castrol and its prone to guming up everything. the PV motors didnt like the stuff much if you dont like the way it smell buy some fuel stinky Quote Link to comment Share on other sites More sharing options...
theeechozen1 Posted April 7, 2011 Report Share Posted April 7, 2011 I run AV 100LL mixed 4 gallons to 1 gallon of 91 pump (thats the highest we get in AZ) & Blenzall 455 Ultra @ 24:1 fully biodegradable all natural Soy Bean Oil It is the chit to say the least.. But if you think that castor leaves a mess, you have no business messing with this stuff Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 13, 2011 Report Share Posted April 13, 2011 I switched from redline synthetic to Belray HC-1 synthetic oil. was sick of spending 13 bucks on a 500ml bottle for the redline. Local shop has the belray for $60 a gallon. nobody runs belray? figued it would be better than redline havent had a chance to try it out yet Quote Link to comment Share on other sites More sharing options...
gstaten24 Posted April 13, 2011 Report Share Posted April 13, 2011 I switched from redline synthetic to Belray HC-1 synthetic oil. was sick of spending 13 bucks on a 500ml bottle for the redline. Local shop has the belray for $60 a gallon. nobody runs belray? figued it would be better than redline havent had a chance to try it out yet How much was it for a gallon of redline? Cuz I spend 65$ per gallon when I lived In Oregon. Now the best I can get in town is yamalube. Needless to say I have to buy it off the Internet now haha Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 13, 2011 Report Share Posted April 13, 2011 How much was it for a gallon of redline? Cuz I spend 65$ per gallon when I lived In Oregon. Now the best I can get in town is yamalube. Needless to say I have to buy it off the Internet now haha I couldnt even get it by the gallon out here. I could only get it in 500ml bottles. which was like 12.99 a bottle. belray was 60 for a gallon. so thats why i switched. I thought belray makes the best stuff so thats another reason why i switched. Quote Link to comment Share on other sites More sharing options...
jay shafer Posted April 14, 2011 Report Share Posted April 14, 2011 redline shock proof gear oil and redline 2 stroke alky mix....both are very good so far.... Quote Link to comment Share on other sites More sharing options...
sand geek Posted April 14, 2011 Report Share Posted April 14, 2011 Used to run Klotz in all my bikes...but I had an '88 Tecate 4 for a few years, the Klotz gummed up the power valves on it real bad. I converted to Maxima Super M. Things come apart a lot cleaner. sg Quote Link to comment Share on other sites More sharing options...
midlifecrisis Posted April 14, 2011 Report Share Posted April 14, 2011 See its an opinion thing! I stay away from a synthetic oil in winter, as it can break down into its base components, and cause issues. I use Samurai in the summer, castor in winter, all at 40:1, and type F tranny fluid in the cases Quote Link to comment Share on other sites More sharing options...
CFH87 Posted April 14, 2011 Report Share Posted April 14, 2011 Thinking of running klotz st in a 50/50 mix of race gas and premium. If I mix at 40:1 will it gum shit up? Or should I run the r50 klotz offers. Quote Link to comment Share on other sites More sharing options...
Daniello Posted April 15, 2011 Report Share Posted April 15, 2011 I use Castrol A747 (now the sell it under the name X77), this is a oil normaly only for racing use (1 bottle costs 23,50 euro - which is about 34 Dollars) I mix it 1:40 icw Shell V-Power Octane 100 Quote Link to comment Share on other sites More sharing options...
BLK'N'YELLOW Posted April 18, 2011 Report Share Posted April 18, 2011 (edited) whats up i thought klotz was one of the best, hows there flex drive 30 for the banshee tranny? Edited April 18, 2011 by BLK'N'YELLOW Quote Link to comment Share on other sites More sharing options...
05Twin350 Posted April 18, 2011 Report Share Posted April 18, 2011 40:1 Klotz not a single problem and I run the bike hard everytime Quote Link to comment Share on other sites More sharing options...
BLK'N'YELLOW Posted April 18, 2011 Report Share Posted April 18, 2011 whats the goods n bads about 50to 1 or 32to1 , klotz with vp110 . whats the best ratio ? thanks Quote Link to comment Share on other sites More sharing options...
PhilMoore Posted April 21, 2011 Report Share Posted April 21, 2011 I have been using Yamalube 2s in my 2001 Banshee since it was new. I am still running the original pistons and rings. I don't ride it much though. I might average 10 gallons of gas a year. Quote Link to comment Share on other sites More sharing options...
RC418 Posted April 21, 2011 Report Share Posted April 21, 2011 whats the goods n bads about 50to 1 or 32to1 , klotz with vp110 . whats the best ratio ? thanks 50:1 is a learner ratio than 32:1 which means you would have less premix oil per gallon of gas, If you go too lean you could potentially damage your engine as you have less lubrication. Some would say that you get a little more performance when running a leaner ratio, I personally run 32:1 in my +4Mil fully race ported banshee. If you run too much premix your bike may fowl spark plugs often,bike may blubber and smoke out the exhaust quiet a bit or potentially loose power. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.