bigblockbanshee Posted March 8, 2011 Report Share Posted March 8, 2011 (edited) Yes I should've said stinger in my title but I can't edit it. Anyway I'm trying to put on my exhaust an notice that the left silencer sticks out about an inch past the right side and the added length is in the stinger tube, the pipes are close to the same. Are all of them like this? Seems really tacky to me. These are T5s by the way. Edited March 8, 2011 by bigblockbanshee Quote Link to comment Share on other sites More sharing options...
fastquad02blaster Posted March 9, 2011 Report Share Posted March 9, 2011 I don't remember that on mine but they could've been that way. I had a hell of a time getting the rear mount hole of the silencer pipe to line up with my hole in my frame. I had to tweak it forward some to get it on there. Sorry I'm not much help. Quote Link to comment Share on other sites More sharing options...
hnb Posted March 9, 2011 Report Share Posted March 9, 2011 I just got done putting new stinger seals and head seals for the toomey exhaust on mine and I do not have one that sticks out any farther on one side than the other --- but I ahve seen others that way you are describing -- and have put a little extra bend in the sitnger pipe for clearance to change the length (AKA shorthen) and seemend to clear the frame on that side a little better -- just food for thought Quote Link to comment Share on other sites More sharing options...
bansheeboy91 Posted March 9, 2011 Report Share Posted March 9, 2011 i think so??? My T-5's arnt eqaul...they dont stick out an inch, but mine are about 1/2 in. Quote Link to comment Share on other sites More sharing options...
Trick2stroke Posted March 9, 2011 Report Share Posted March 9, 2011 I have a set that are exactly like that. I thought the same thing when I saw it, pretty tacky. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 9, 2011 Report Share Posted March 9, 2011 My CPI's have different lenght stinger tubs as well. Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted March 9, 2011 Author Report Share Posted March 9, 2011 Glad it's not just me then. I decided to loosen everything and try to tweak it some more and I think I got them pretty close as I tightened everything from the rear forward. I learned that trick from my R1 lol. Quote Link to comment Share on other sites More sharing options...
MatHolland Posted March 11, 2011 Report Share Posted March 11, 2011 is that a piece of garden hose on the end of the silencer and end of the header? my left side does not fit well at all...the clamp will bearly make the 2 meet. any suggestions?...the silencer doesnt even mount well at the last mount..the exhaust is in like perfect shape tho. Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted March 12, 2011 Author Report Share Posted March 12, 2011 is that a piece of garden hose on the end of the silencer and end of the header? my left side does not fit well at all...the clamp will bearly make the 2 meet. any suggestions?...the silencer doesnt even mount well at the last mount..the exhaust is in like perfect shape tho. It's the rubber piece that came with the pipe clamps that I bought. And yes it is strikingly similar to a big garden hose IMO. After I tweaked the mounts a bit and got them evened up somewhat I just tightened everything from the silencers forward. I got some wierd looking rear hangers off of another 'shee though so that may have something to do with it. Everything seems ok now, fired it for the first time last night. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.