qhall28 Posted March 23, 2011 Report Posted March 23, 2011 Thanks for the info. It is great stuff for Green Horns like myself who wants to attempt to assemble an engine. 1 Quote
michigan_soler Posted March 25, 2011 Report Posted March 25, 2011 just outta curiosity, what stator cover is that? Quote
BigRed350x Posted March 26, 2011 Author Report Posted March 26, 2011 just outta curiosity, what stator cover is that? Its an old cascade unit from a few years ago. Quote
banshee530 Posted April 15, 2011 Report Posted April 15, 2011 (edited) banshee530 April 15,2011 1:45pm I am new too this site and dont really understand how it works yet but you may not be a pro engine builder but did an awesome job on this and it helped me greatly,thanx..... Edited April 15, 2011 by banshee530 Quote
BigRed350x Posted April 15, 2011 Author Report Posted April 15, 2011 banshee530 April 15,2011 1:45pm I am new too this site and dont really understand how it works yet but you may not be a pro engine builder but did an awesome job on this and it helped me greatly,thanx..... Glad you were able to get some use from it. Thanks - Jared Quote
RollinRhino Posted April 17, 2011 Report Posted April 17, 2011 The best part was the clutch rebuild section. Really, this is a great "how-to" thread. Quote
serg88 Posted April 22, 2011 Report Posted April 22, 2011 I need to know what this screw right on this picture is for my banshee doesnt have that screw or the little c looking metal thing behind it Quote
BigRed350x Posted April 22, 2011 Author Report Posted April 22, 2011 I need to know what this screw right on this picture is for my banshee doesnt have that screw or the little c looking metal thing behind it The little C-shaped plate is used to hold the bearing in place, as well as holding the two case halves together. I've had banshees in the past that didn't have them and it didn't seem to really affect anything, but the way I see it is that the engineers who designed these engines put it there for a reason, so its usually a good idea to have parts like that on there, even if I don't know exactly what its supposed to do. lol - Jared Quote
thebrittishguy Posted April 23, 2011 Report Posted April 23, 2011 Well Done on this Jared! thank you very much! im now putting together that 4mil i bought from you and this is very useful! Quote
BigRed350x Posted May 26, 2011 Author Report Posted May 26, 2011 thank u big red No problem man. Quote
Phelps Posted September 1, 2011 Report Posted September 1, 2011 so how did the red rtv work out? was always told not to use a rtv silicone.... Quote
Coupelx Posted September 1, 2011 Report Posted September 1, 2011 on a blaster it will leak. All 3 times. Quote
BigRed350x Posted September 1, 2011 Author Report Posted September 1, 2011 so how did the red rtv work out? was always told not to use a rtv silicone.... Works great, haven't had a single issue with it. I've been using the red hi-temp gas/oil resistant silicone for about 8 years now & have never had a single leak. If your cases are clean and you give it enough time to dry, it works perfect. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.