LONGROD Posted February 27, 2011 Report Share Posted February 27, 2011 I need a link for some k&n filters and outer wears for 28 mm pwks.. thanks. Quote Link to comment Share on other sites More sharing options...
gotta_goatsfast Posted February 27, 2011 Report Share Posted February 27, 2011 Really.... are you that lazy? Search the internet. Search/call site sponsors. Check out rockymountainatv.com, denniskirk.com, RJATV.com, ect. If you would have measured the "mouth" of your carburetors you would know that the filter flange needs to be 50mm in diameter. You might also consider a filter with a 5 or 10 degree turn down. So, get searching! Also, if you ride in dusty conditions religiously clean/oil the filter. Or consider a good foam filter. IMO, if you can see direct light through it dust particles will get through it. lol Quote Link to comment Share on other sites More sharing options...
crash&burn Posted February 27, 2011 Report Share Posted February 27, 2011 Come on really do a little research first... the time you spent typing this post out you could have found your filters and had them ordered Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted February 27, 2011 Report Share Posted February 27, 2011 WOW its pretty easy to find them Quote Link to comment Share on other sites More sharing options...
LONGROD Posted February 27, 2011 Author Report Share Posted February 27, 2011 Funny you say that cause your little picture clearly states. For stock carb only... maybe some of us spend onetime ridding And not playing on our pc.. so good to hear its so easy.. obviously not easy enough to post a link.. Quote Link to comment Share on other sites More sharing options...
SheezFast02 Posted February 28, 2011 Report Share Posted February 28, 2011 Funny you say that cause your little picture clearly states. For stock carb only... maybe some of us spend onetime ridding And not playing on our pc.. so good to hear its so easy.. obviously not easy enough to post a link.. LOL I noticed that as well. If you bought those ones in the pic, you'd be wasting your money, as they won't fit. I installed PWK 28's on my Shee and now I can't get the factory boots on the airbox to fit. I also couldn't seem to get a clear answer form anyone as to how I can run these carbs and keep the airbox. Pain in the ass! Quote Link to comment Share on other sites More sharing options...
gotta_goatsfast Posted February 28, 2011 Report Share Posted February 28, 2011 Did I not give you enough information? Are you sure you can install such a complex item? Part numbers (I don't own 28 PWKS so this is all from a 5 minute search) K&N straight-RA-0520 K&N straight-RA-0510 K&N straight-RU-0520 K&N 10* angle-RU-1060 K&N 10* angle-RU-1070 There are plenty more that will work from K&N and a pile more from other companies. If you still can't figure it out you should probably leave it alone. Quote Link to comment Share on other sites More sharing options...
SandmanPNW Posted February 28, 2011 Report Share Posted February 28, 2011 funny Quote Link to comment Share on other sites More sharing options...
LONGROD Posted February 28, 2011 Author Report Share Posted February 28, 2011 Did I not give you enough information? Are you sure you can install such a complex item? Part numbers (I don't own 28 PWKS so this is all from a 5 minute search) K&N straight-RA-0520 K&N straight-RA-0510 K&N straight-RU-0520 K&N 10* angle-RU-1060 K&N 10* angle-RU-1070 There are plenty more that will work from K&N and a pile more from other companies. If you still can't figure it out you should probably leave it alone. I have an item you can install your two lips on.. you seem like just the person for the job.. lmao Quote Link to comment Share on other sites More sharing options...
SandmanPNW Posted February 28, 2011 Report Share Posted February 28, 2011 here ya go roddy piper http://bansheehq.com/forums/index.php?showtopic=140713 Quote Link to comment Share on other sites More sharing options...
LONGROD Posted February 28, 2011 Author Report Share Posted February 28, 2011 Wow. Now we don't know the difference between filters and a carb.. you kids crack me up.. Quote Link to comment Share on other sites More sharing options...
gotta_goatsfast Posted February 28, 2011 Report Share Posted February 28, 2011 I have an item you can install your two lips on.. you seem like just the person for the job.. lmao Are you going to post a thread asking how to FIND your "item"? Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted February 28, 2011 Report Share Posted February 28, 2011 CALL A SITE SPONSER EASY AS THAT. Then you know your going to get what you need if you cant figure it out. Quote Link to comment Share on other sites More sharing options...
SandmanPNW Posted February 28, 2011 Report Share Posted February 28, 2011 Wow. Now we don't know the difference between filters and a carb.. you kids crack me up.. Funny I read that as carbs and filters. whoops. Quote Link to comment Share on other sites More sharing options...
LONGROD Posted February 28, 2011 Author Report Share Posted February 28, 2011 I got it all ordered last night. Just to funny to quiet just yet. Lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.