jay shafer Posted February 16, 2011 Report Share Posted February 16, 2011 Jay... Any idea if that was a chassis dyno or a motor dyno? Chassis dyno Quote Link to comment Share on other sites More sharing options...
J-Madd Posted February 16, 2011 Report Share Posted February 16, 2011 I'm gonna say you can knock 10% of that dyno number. I'd also like to see a comparison on another dyno. (Not knocking your motor - it will still be a good runner; my 10 Mil Cub only makes 103-105 hp and it runs like a champ at the track.) Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 16, 2011 Report Share Posted February 16, 2011 Alky 7mm rdz eliminators which curve is which? Quote Link to comment Share on other sites More sharing options...
jay shafer Posted February 16, 2011 Report Share Posted February 16, 2011 which curve is which? it wasnt a single wheel dyno and it had stock reeds and timing was +5 and with the porting that he already done and the other curve was with more porting vforce 3's and his rdz pipes and +7 or +8 port matched cases and a few more other lil things that my lil motor needed Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted February 20, 2011 Report Share Posted February 20, 2011 So true....have u seen or heard of the cylinders wicked has come out with Wicked New Cylinders Hmm im missing something..i thought 68 mm was a 421 and a 66 was a 397?? Quote Link to comment Share on other sites More sharing options...
tedd1 Posted February 20, 2011 Report Share Posted February 20, 2011 Hmm im missing something..i thought 68 mm was a 421 and a 66 was a 397?? Depends on stroke... Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted February 20, 2011 Report Share Posted February 20, 2011 Depends on stroke... Right...it says 58mm +4 mm 421cc's Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted February 24, 2011 Report Share Posted February 24, 2011 (edited) maybe all of their cylinders are 68mm bore, and the 58mm stands for + 4 longer stroke than stock.. so 58 stroke and 68 bore would be a 421. Edited February 24, 2011 by Yamahopper10 Quote Link to comment Share on other sites More sharing options...
slobanshee Posted April 13, 2011 Author Report Share Posted April 13, 2011 Thanks for all the great input guys! I have talked to most of the site sponsers and decided to go with HJR. Hes putting together a ported 10 mil cub. now that i have a motor i need help picking a badass exhaust,intake, and carbs. Also cant decide if i should run gas or alky? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 14, 2011 Report Share Posted April 14, 2011 Thanks for all the great input guys! I have talked to most of the site sponsers and decided to go with HJR. Hes putting together a ported 10 mil cub. now that i have a motor i need help picking a badass exhaust,intake, and carbs. Also cant decide if i should run gas or alky? Kevin should be able to tell you what will work best with his motor. Quote Link to comment Share on other sites More sharing options...
slobanshee Posted April 15, 2011 Author Report Share Posted April 15, 2011 yea he gave me some options but i like to get real world opinions on it from guys that ride. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 15, 2011 Report Share Posted April 15, 2011 My old 10mm Cub setup.. Shearer big bore inframes 39mm PWK on gas VF3 UPP intakes Noss head It was a hard running bike. Quote Link to comment Share on other sites More sharing options...
Hilarious Posted April 15, 2011 Report Share Posted April 15, 2011 Thanks for all the great input guys! I have talked to most of the site sponsers and decided to go with HJR. Hes putting together a ported 10 mil cub. now that i have a motor i need help picking a badass exhaust,intake, and carbs. Also cant decide if i should run gas or alky? methanol if you are strictly drag racing Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted April 15, 2011 Report Share Posted April 15, 2011 If you are going to be dune riding/racing I would skip the cub cylinder. Go with a serval or a twister cylinder. I'm partial to the twister stuff myself, but to each their own... Either way, I would go with the 10mil. Spend the money and get a good chassis setup. It will make a world of difference on the dunes & whoops. Whatever you decide to go with, I would send your cylinders off to Kevin at Herr Jugs Racing and get them ported. Or just buy them direct from him and have him port them before he sends them out. Quote Link to comment Share on other sites More sharing options...
slobanshee Posted April 15, 2011 Author Report Share Posted April 15, 2011 If you are going to be dune riding/racing I would skip the cub cylinder. Go with a serval or a twister cylinder. I'm partial to the twister stuff myself, but to each their own... Either way, I would go with the 10mil. Spend the money and get a good chassis setup. It will make a world of difference on the dunes & whoops. Whatever you decide to go with, I would send your cylinders off to Kevin at Herr Jugs Racing and get them ported. Or just buy them direct from him and have him port them before he sends them out. Kevin did the porting/building already on the 10 mil cub already. lol He is who i bought everything from.l i wont be trail riding much with it. It will be playing a little then to the drags. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.