bigblockbanshee Posted January 30, 2011 Report Share Posted January 30, 2011 So I bought a set of used extended A-arms and they don't fit for $hit so I need some measurements. They had nice bronze bushings in them but due to the fitment issues I had to knock them out and hacked them up pretty good doing so. Here's a list of measurements I need if someone feels like humoring me a bit. I would prefer the arms themselves be measured WITHOUT bushings... Uppers- width of tube that mounting bolt goes through and inside diameter of tube where bushings go Lowers- width of both tubes where bolts go through, inner spacing between tubes, overall width from outside of one tube to another Bushings- inner diameter and outer diameter The main reasoning for all of this is because I don't know what brand these arms are and the shafts that the bolts go through are thicker than the stock shafts so I'm in kind of a bind partly because of this. I want to put the stock shafts in because I have a brand new set but I'm not sure about the OD of the stock bushings being able to fit into these no-name arms I have. And as for the mounting widths, these don't line up so I'm gonna have to hack them a bit to make them fit like they should. And to think I gave up a dang nice set of stock arms for these... Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted January 30, 2011 Author Report Share Posted January 30, 2011 bump Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted February 1, 2011 Author Report Share Posted February 1, 2011 No one has a set of stock a-arms laying around that they could measure for me...? Quote Link to comment Share on other sites More sharing options...
fastquad02blaster Posted February 3, 2011 Report Share Posted February 3, 2011 I can tonight. Sorry. I haven't been on here in a day or two. Quote Link to comment Share on other sites More sharing options...
stacman450 Posted February 3, 2011 Report Share Posted February 3, 2011 sell them and get some stockers on fleabay or here.. and LETS RIDE!!!!! Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted February 4, 2011 Author Report Share Posted February 4, 2011 Thanks a ton fastquad, and Stacman, some things are just worth waiting for dude lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.