vbanshee Posted January 27, 2011 Report Share Posted January 27, 2011 ok my fellow banshee owners here it goes. my clutch was starting to go so i bought a weisco clutch new springs and plates. installed it in the right however the clutch doesnt engage it feel like its locked i dont know what to do the spring on top of the case for the clutch is now bent. ended up breaking my pearch. this clutch is bad news! any ideas? Quote Link to comment Share on other sites More sharing options...
okbeast Posted January 27, 2011 Report Share Posted January 27, 2011 Can you manually move the clutch actuator arm on top of the cases? I'm guessing not. Did you put the rod/ball back in properly? Quote Link to comment Share on other sites More sharing options...
vbanshee Posted January 27, 2011 Author Report Share Posted January 27, 2011 Can you manually move the clutch actuator arm on top of the cases? I'm guessing not. Did you put the rod/ball back in properly? no i cant if adjusted with minimal slack it barley moves barleeey Quote Link to comment Share on other sites More sharing options...
mitty8251 Posted January 27, 2011 Report Share Posted January 27, 2011 is your pushrod stuck/welded inside? might need to take your cover off to make sure the ball and rod come out easily and move freely Quote Link to comment Share on other sites More sharing options...
700vflash Posted January 28, 2011 Report Share Posted January 28, 2011 Get a shop manual!! loosen the adjustments at the handlebars and the pressure plate before you try adjust it, if not it will bind up and not work right! But it sound like the adjustment at the pressure plate is off! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.