dicedealer702 Posted January 24, 2011 Report Share Posted January 24, 2011 I think I might had made a big mistake, long story short I used tranny oil to lube my crank, seals, pistons, and cylinders...ahhhhhhh. So my question is can I start it that way and let it burn, or do I have to take it apart and clean it out? Thanks Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted January 24, 2011 Report Share Posted January 24, 2011 you should not have any problems i use 2-stroke oil or assembly lube on all of mine Quote Link to comment Share on other sites More sharing options...
dicedealer702 Posted January 24, 2011 Author Report Share Posted January 24, 2011 Well I ment to use 2-stroke. But I am such a stoner.... Quote Link to comment Share on other sites More sharing options...
sangheraent Posted January 25, 2011 Report Share Posted January 25, 2011 what I would do Is pour about a teaspoon of 2 stroke oil in both plug holes and turn the motor slowly letting it get to the bottom i mean move the kicker by hand. then wait a couple of mins and start it up. the trans oil should burn up if there is some proper oil in there. a 2 stroke is lubed by the pool of oil on the bottom of your crank case. the gas only brings the oil in it seperates in the motor and pools on the bottom and the spashing of the crank lubes up the cylinders and crank. I usually put about a teaspoon of 2 stroke oil on top of the normal oil I use during assembly in all of my motors and I havent had any problems yet. Quote Link to comment Share on other sites More sharing options...
uhoh0573 Posted January 25, 2011 Report Share Posted January 25, 2011 I hope the boner you influenced to move was your own.. Quote Link to comment Share on other sites More sharing options...
camatv Posted January 25, 2011 Report Share Posted January 25, 2011 i think i would be more worried about being a stoner and assemblyling a banshee engine then the syle of lube used. i'd mix up the correct fuel and fire it up watch the smoke cloud Quote Link to comment Share on other sites More sharing options...
crustydemon Posted January 25, 2011 Report Share Posted January 25, 2011 I hope the boner you influenced to move was your own.. I hope so too, a gay stoner could really get taken advantage of around this site. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 25, 2011 Report Share Posted January 25, 2011 Mix up some normal fuel and I'd just start it up and burn the junk out. LOL Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted January 25, 2011 Report Share Posted January 25, 2011 This is exactly why drugs are a good idea. Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted January 25, 2011 Report Share Posted January 25, 2011 a 2 stroke is lubed by the pool of oil on the bottom of your crank case. the gas only brings the oil in it seperates in the motor and pools on the bottom and the spashing of the crank lubes up the cylinders and crank. umm.....2-stroke oil is not seperated when it runs through the motor. True a VERY small bit MAY pool in the bottom of the cases from the oil possibly seperating out of the fuel mix that was in the crank and the transfers after it has been stored for a long time......however the crank does not get emersed into oil or splash oil up onto the cylinder walls. That is how a 4-stroke works......2-strokes are soley lubed by the oil coming into the cylinders via the oil in the fuel mix itself.. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted January 25, 2011 Report Share Posted January 25, 2011 I hope so too, a gay stoner could really get taken advantage of around this site. Gay Banshee riding, midget goat loving stoners would dominate the HQ. Quote Link to comment Share on other sites More sharing options...
hnb Posted January 27, 2011 Report Share Posted January 27, 2011 you will be ok don't worry too much --- but the goats and gay banshees' is what would worry me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.