Phelps Posted January 3, 2011 Report Share Posted January 3, 2011 need help figuring out who made these so i can replace the ball joints. threads that mount to the spindles are M12x1.50 and the part that goes through the arms look like M14-M16x1.50's. any help would be appreciated. thanks! Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted January 3, 2011 Report Share Posted January 3, 2011 MAGNUM Quote Link to comment Share on other sites More sharing options...
Judge1 Posted January 3, 2011 Report Share Posted January 3, 2011 Those look just like my burgard arms and joints. Quote Link to comment Share on other sites More sharing options...
Phelps Posted January 3, 2011 Author Report Share Posted January 3, 2011 MAGNUM they do by pictures look more like magnums than the burgaurds although they are close as well. have any idea how to get parts for them? i am having a hard time finding the makers info online. only finding ppl that sell for them. thanks! Quote Link to comment Share on other sites More sharing options...
Keyser Soze Posted January 3, 2011 Report Share Posted January 3, 2011 http://www.amstarmanufacturing.com/ They should have em Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted January 3, 2011 Report Share Posted January 3, 2011 Have you checked with Tim? He stocks a lot of balljoints and heims. Quote Link to comment Share on other sites More sharing options...
Phelps Posted January 3, 2011 Author Report Share Posted January 3, 2011 Have you checked with Tim? He stocks a lot of balljoints and heims. very first thing i did Quote Link to comment Share on other sites More sharing options...
camatv Posted January 4, 2011 Report Share Posted January 4, 2011 tim's balls should fit them. hehee just check to make sure your spindles aren't reamed they shouldnt be with 16mm stud Quote Link to comment Share on other sites More sharing options...
Phelps Posted January 4, 2011 Author Report Share Posted January 4, 2011 tim's balls should fit them. hehee just check to make sure your spindles aren't reamed they shouldnt be with 16mm stud actually i did have to ream them. Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted January 4, 2011 Report Share Posted January 4, 2011 tim's balls should fit them. hehee just check to make sure your spindles aren't reamed they shouldnt be with 16mm stud I talked to Tim today about them, his balls are too big... Quote Link to comment Share on other sites More sharing options...
Phelps Posted January 4, 2011 Author Report Share Posted January 4, 2011 ok so i ordered the moog tie rods from the other thread and they are in fact too big. mine are a 1.50 thread pitch, but i am pretty sure they are a M14 bolt instead of a M16. any help would be awesome! i have ordered a few other tie rod ends, but it may be a dead end. thanks!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.