b-nasty Posted December 27, 2010 Report Share Posted December 27, 2010 Parting out the complete bike, If there is something you see that isnt listed pm me and I will get you a descritioin and price. If you would like better pictures of a certain part let me know and I can get them for you. Buyer to pay paypal fees and shipping. I have no problem paying a little for shipping if its more because of my packing. I would rather pay $10 because I used to much than not enough and somebody get something messed up. pictures at: http://s775.photobucket.com/albums/yy37/zx636-rider/ Complete bottom end everything included in order to bolt on your upper component and go. Everything is new, motor was only heat cylced never raced matter of fact it never left my garage. $950.00 cases ported 4mm hotrods longrod crank tz bearing's 1-5 overrided trans lockout clutch lockout cover Pancake bearing new clutch's and springs billet water cover billet stator cover OEM stator Im shure theres a few more items im missing. Stock frame drag lightened with chromemoly subframe, fresh powder coat. 350.00 -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. Fireball Racing. 350.00 39mm Mikuni pwk setup for alky with cable . sold K&N Pod filters with pre-filters. New. 75.00 Shear Big Bore out of frames, one to each side.New 350.00 Stock fuel tank with dual pingle and chrome cap. 80.00 JJ&A 40mm Drag axle, complete minus carrier. 400.00 JJ&A 40mm axle carrier with bearings. 100.00 +10 tyson swingarm "Like New" with chain. New 350.00 13 paddle extremes on itp rims, 22x11x8, like new. 350.00 front marvin shaws. 12.5 eye to eye. 250.00 rear marvin shaw. 13.0 eye to eye. 125.00 front spindle mounts with tires. New and bad a**. 400.00 polished rear brake caliper with braided line. 100.00 polished rear brake piston and resevoir with chrome cap. 75.00 chrome brake lever.40.00 chrome shift lever.40.00 chrome steering stem. like new. 80.00 chrome motor mounts.40.00 polished footpegs. 50.00 chrome thumb throttle assembly. 35.00 chrome levers. 25.00 Drag cut seat with crushed velvet. New. 100.00 factory radiator with hoses. offer. factory harness drag cut. offer Quote Link to comment Share on other sites More sharing options...
Ryan2002 Posted December 27, 2010 Report Share Posted December 27, 2010 (edited) Could you please send me some better pics of your foot pegs, shifter, @ rear brake lever also how much do you want for the throttle housing @ lockout cover Ryanardoin.70581@yahoo.com. Thanks Edited December 27, 2010 by Ryan2002 Quote Link to comment Share on other sites More sharing options...
b-nasty Posted December 27, 2010 Author Report Share Posted December 27, 2010 Lockout is staying with the bottom end. I can get you pictures tommorow. thanks Quote Link to comment Share on other sites More sharing options...
b-nasty Posted December 27, 2010 Author Report Share Posted December 27, 2010 Also have billet intake, used them for 39mm carbs. 75.00 V-force 3 reeds. 125.00 Quote Link to comment Share on other sites More sharing options...
trx4502shee Posted December 27, 2010 Report Share Posted December 27, 2010 Pm sent Quote Link to comment Share on other sites More sharing options...
BigDoug Posted December 27, 2010 Report Share Posted December 27, 2010 How much to ship the seat to 85224 in AZ... thanks Quote Link to comment Share on other sites More sharing options...
Outfront Performance Posted December 28, 2010 Report Share Posted December 28, 2010 Parting out the complete bike, If there is something you see that isnt listed pm me and I will get you a descritioin and price. If you would like better pictures of a certain part let me know and I can get them for you. Buyer to pay paypal fees and shipping. I have no problem paying a little for shipping if its more because of my packing. I would rather pay $10 because I used to much than not enough and somebody get something messed up. pictures at: http://s775.photobucket.com/albums/yy37/zx636-rider/ Complete bottom end everything included in order to bolt on your upper component and go. Everything is new, motor was only heat cylced never raced matter of fact it never left my garage. $950.00 cases ported 4mm hotrods longrod crank tz bearing's 1-5 overrided trans lockout clutch lockout cover Pancake bearing new clutch's and springs billet water cover billet stator cover OEM stator Im shure theres a few more items im missing. Stock frame drag lightened with chromemoly subframe, fresh powder coat. 350.00 -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. Fireball Racing. 350.00 39mm Mikuni pwk setup for alky with cable . sold K&N Pod filters with pre-filters. New. 75.00 Shear Big Bore out of frames, one to each side.New 350.00 Stock fuel tank with dual pingle and chrome cap. 80.00 JJ&A 40mm Drag axle, complete minus carrier. 400.00 JJ&A 40mm axle carrier with bearings. 100.00 +10 tyson swingarm "Like New" with chain. New 350.00 13 paddle extremes on itp rims, 22x11x8, like new. 350.00 front marvin shaws. 12.5 eye to eye. 250.00 rear marvin shaw. 13.0 eye to eye. 125.00 front spindle mounts with tires. New and bad a**. 400.00 polished rear brake caliper with braided line. 100.00 polished rear brake piston and resevoir with chrome cap. 75.00 chrome brake lever.40.00 chrome shift lever.40.00 chrome steering stem. like new. 80.00 chrome motor mounts.40.00 polished footpegs. 50.00 chrome thumb throttle assembly. 35.00 chrome levers. 25.00 Drag cut seat with crushed velvet. New. 100.00 factory radiator with hoses. offer. factory harness drag cut. offer pics of the pipes , harness, and motor mouts to bustbig50@aol.com thanks Quote Link to comment Share on other sites More sharing options...
b-nasty Posted December 28, 2010 Author Report Share Posted December 28, 2010 All pm's responded to and pictures sent. Following items are sold. front marvins rear marvins VF3 reeds Quote Link to comment Share on other sites More sharing options...
b-nasty Posted December 28, 2010 Author Report Share Posted December 28, 2010 fuel tank-sold intake's- pending Quote Link to comment Share on other sites More sharing options...
b-nasty Posted December 29, 2010 Author Report Share Posted December 29, 2010 Make me some offers guys. Quote Link to comment Share on other sites More sharing options...
supersider Posted December 29, 2010 Report Share Posted December 29, 2010 Make me some offers guys. 500 FOR THE PADDLES AND AXLE???????????????????????? Quote Link to comment Share on other sites More sharing options...
Nick Bennett Posted December 29, 2010 Report Share Posted December 29, 2010 pm sent Quote Link to comment Share on other sites More sharing options...
damfast Posted December 29, 2010 Report Share Posted December 29, 2010 pm sent Quote Link to comment Share on other sites More sharing options...
ARABANSHEE Posted December 29, 2010 Report Share Posted December 29, 2010 pic of frame to moeali215@yahoo.com, does it have a title? and will u ship? Quote Link to comment Share on other sites More sharing options...
4MiLLDraGSheE Posted December 31, 2010 Report Share Posted December 31, 2010 what would you do shipped for the swing arm and the seat shipped to michigan. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.