nick_n_ii Posted December 24, 2010 Report Share Posted December 24, 2010 Trends Banshee owners follow: Lets what all is considered a trend and why? Such as Fenders, Full, Trimmed, none at all Why and why not for each. Me I've always been one that liked Full fenders front and rear. But I love the woods, and with that comes mud. Quote Link to comment Share on other sites More sharing options...
frinkbc Posted December 24, 2010 Report Share Posted December 24, 2010 i love the look of a well built banshee with no fenders, plastics cheapen the look thats just my opinion and i dont run through the woods, sand only guess its all up to your riding style Quote Link to comment Share on other sites More sharing options...
shadowbanshee Posted December 24, 2010 Report Share Posted December 24, 2010 I got my banshee bone stock except for ohlins suspension and 30mm carbs. i built it all up without any internal engine mods and it has enough power for my 215pd butt. i have white plastics uncut and aftermarket orange glow HID headlights and LED flashers in the middle under the radiator and i think mine looks best with full plastics, although ive seen some cut that look pretty sweet. guess it just depends what you are going for when you build it. Quote Link to comment Share on other sites More sharing options...
VegasJeff Posted December 24, 2010 Report Share Posted December 24, 2010 I prefer the cut front fenders, but it took me awhile to get use to it.I kept looking at the front shocks working up and down instead of watching where I was going. Quote Link to comment Share on other sites More sharing options...
06specialedition Posted December 24, 2010 Report Share Posted December 24, 2010 I've always ran my duners with front and rear plastics. On my shee now, I haven't touched them. I do like the cut look as well. Quote Link to comment Share on other sites More sharing options...
bansheesrtoys Posted December 25, 2010 Report Share Posted December 25, 2010 i like the fullbore set , and the race cut front fenders.With no headlights. Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted December 25, 2010 Report Share Posted December 25, 2010 fuk trends Quote Link to comment Share on other sites More sharing options...
CFH87 Posted December 25, 2010 Report Share Posted December 25, 2010 I've been thinking of cutting my plastics up for a while now. But I can't lie cut plastics with r2 pipes do look nice Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted December 25, 2010 Report Share Posted December 25, 2010 I hate the look of front fenders on just about every ATV. Everyone in our ride group has there front fenders cut on the Banshees. When we got one for my wife, it had MINT looking factory plastics. Even the graphics were perfect. I asked her if she wanted full fenders or race cuts....she said "It looks a little goofy with the fenders. Is it hard to cut them off?" Well, I waited about 4 weeks, then one night I came in and told her "Well, your in the club now....your fenders are cut." She thought it looked alot cooler. Now one of my frineds got a different set of plastics from a parts bike. (It wasn't nice looking, but was in better shape than what he had.) His previous set of plastics had cut fronts. The newer set had full front fenders. I kept telling him to cut those damn ears off. He gave me the whole line about running in mud and water and wanting the protection. We had this discussion on the way to the "Badlands" in Indiana. An hour later we all took a trip through the tubes there and jumped into the water hole at the exit of the tubes. (It's like a 8"-10" deep 15ft round splash pool of water.) We all stopped and hung out at that area to watch the other guys come through the tubes. I took that time to point out that I had the same wet spots on my pants as he did. So much for fenders saving you. At the end of the day we were ALL equaly muddy. Cut the fenders. Ears look gay. Don't think so?.....Just look at factory LT-500 plastics and tell me that bike looks cool. Or don't....without stock fenders to show how they looked stock...no one would know how much cooler they look cut. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted December 25, 2010 Report Share Posted December 25, 2010 Boost Bottles! I see them everywhere. Quote Link to comment Share on other sites More sharing options...
thrill-billy85 Posted December 25, 2010 Report Share Posted December 25, 2010 yeah every time i go ride and someone wants to look at my bike, they always ask... "hey man wheres your boost bottle?"..... uhh in the trash can.... with the old rubber boots that were cracked. then one guy informed me "they add about 10 horsepower"... ha ha He even dynoed hi old one with and without. he said stock (without it) only had 55 hoprsepower (the only other mods he had were pro-circut pipes), but with his fmf boost bottle he said he got 65 horsepower.... at that point i called him a liar, put my shit in gear and took off. i want a stock banshee with a boost bottle that dyno's at 65hp!!!!!!!!!!!! ha ha Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted December 25, 2010 Report Share Posted December 25, 2010 Wonder how much money has been wasted on boost bottles? Was in a sport shop just yesturday and they had one on the wall Quote Link to comment Share on other sites More sharing options...
Trick2stroke Posted December 25, 2010 Report Share Posted December 25, 2010 Probably going to take some shit for this but... Extended swing arms. The banshee already has horrible turning radius and traction, why make it worse? Unless you're pushing over 90 hp I don't see why you want a +4 or +6 or more unless it is purpose built for hill climb/drag. Before I get jumped saying you can't keep your front end down, I've had a ported 4 mil with a -2.5 swinger in the past and the newest build will have the same or a 4 mil serval with anywhere from a -2 to stock length swinger. Keep in mind I'm not a duner or anything so I don't know how paddles effect this. If you ever rode a -2 on a banshee with a +1 forward front end it is not even comparable, really an amazing difference in the dirt. Also lowering... I see too many lowered banshee's with +6 swing arms on bald hole shots that it just makes me sick. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted December 25, 2010 Report Share Posted December 25, 2010 I prefer the cut front fenders, but it took me awhile to get use to it.I kept looking at the front shocks working up and down instead of watching where I was going. hahaha i do the same thing. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 25, 2010 Report Share Posted December 25, 2010 Boost Bottles! I see them everywhere. I have a chrome one on my 18mm DM and it helped with throttle response a lot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.