hump14 Posted November 25, 2010 Report Share Posted November 25, 2010 guys I have a problem my banshee is running good from 0 to 1/4 throttle and then from 3/4 throttle to wide open it runs good but my middle range is bogging so what do i need to do it jetted right according to the spark plug for example if you shift into second and mash into the fuel it bogs but if you feather the throttle it wont bogg whats my proble please help Quote Link to comment Share on other sites More sharing options...
SkinInd_Banshee Posted November 25, 2010 Report Share Posted November 25, 2010 snap pics of the plugs Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted November 26, 2010 Report Share Posted November 26, 2010 Welcome to The H.Q. !! Try adjusting your needle. Try simulating same conditions and pull choke half way out as you do it. If better lower clip (raise needle) If not better go oppisite. Would also be helpful to list ALL modifications . Quote Link to comment Share on other sites More sharing options...
fastquad02blaster Posted November 27, 2010 Report Share Posted November 27, 2010 Sounded like needle adjustment to me too. Quote Link to comment Share on other sites More sharing options...
06specialedition Posted November 27, 2010 Report Share Posted November 27, 2010 Welcome to The H.Q. !! Try adjusting your needle. Try simulating same conditions and pull choke half way out as you do it. If better lower clip (raise needle) If not better go oppisite. Would also be helpful to list ALL modifications . X2. Pull the choke half way and see if your worsens or gets better. That will give you an idea if your needle is rich or lean Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.