pabansheematt Posted November 21, 2010 Report Share Posted November 21, 2010 I figured I'd post some pics of my new clutch setup. It a Streamline hydrolic system. Its a real pain in the ass to get the air bleed out. But you can work the clutch with one finger. Work nice. The only thing I didn't care for was, I had to move the headlight switch. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted November 21, 2010 Report Share Posted November 21, 2010 Looks nice. Expensive? I had a Magura hydro clutch once. I didn't like that I couldn't adjust it. Quote Link to comment Share on other sites More sharing options...
pabansheematt Posted November 22, 2010 Author Report Share Posted November 22, 2010 Looks nice. Expensive? I had a Magura hydro clutch once. I didn't like that I couldn't adjust it. Tyler, if you shop around you can find it for $189 with a ASV lever. It easy to adjust. The heim joint on the end is adjustable, also the other end adjusts. Only bad thing is the carbs need to come off to make adjustment. You can also adjust the lever. I looked at the Magura. I thought it looked a little weak. The line is plastic. The Streamline comes with a braided line. Quote Link to comment Share on other sites More sharing options...
rubberneck Posted November 22, 2010 Report Share Posted November 22, 2010 Hmm, nice i might be getting one of these from santa, i run 6 HD springs on my dune bike Quote Link to comment Share on other sites More sharing options...
pabansheematt Posted November 22, 2010 Author Report Share Posted November 22, 2010 Hmm, nice i might be getting one of these from santa, i run 6 HD springs on my dune bike It should help alot. I run 3 stock and 3 heavy springs. Quote Link to comment Share on other sites More sharing options...
crustydemon Posted November 23, 2010 Report Share Posted November 23, 2010 Where do you get them? Quote Link to comment Share on other sites More sharing options...
DAL Posted January 17, 2011 Report Share Posted January 17, 2011 Anyone know if you can use an existing ASV shorty lever with the Streamline perch? Quote Link to comment Share on other sites More sharing options...
pabansheematt Posted January 17, 2011 Author Report Share Posted January 17, 2011 Anyone know if you can use an existing ASV shorty lever with the Streamline perch? No, you cant. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 18, 2011 Report Share Posted January 18, 2011 Still working good? Anybody else have one of these? I had a magura on my raptor. I didn't like it. It seemed like the slave cylinder didn't have enough travel. It would not disengage the clutch if I installed the salve cylinder with the spacer collar removed. Or with the spacer collar installed it wouldn't release the clutch all the way. It would slip. Quote Link to comment Share on other sites More sharing options...
lms1977 Posted January 18, 2011 Report Share Posted January 18, 2011 That really looks nice have you ever tried the ez pull clutch lever with the 3 holes in the lever for leverage and if so how does this compare as far as pull tension and smoothness. years ago I had the easy pull lever and did not really like it your setup seems better Quote Link to comment Share on other sites More sharing options...
slipknot23 Posted January 19, 2011 Report Share Posted January 19, 2011 Streamline hydrolic clutch with ASV Quote Link to comment Share on other sites More sharing options...
fleury_xlt Posted January 31, 2011 Report Share Posted January 31, 2011 Just bought a kit for my 2006 Banshee. I have a F.A.S.T racing clutch with 6 heavy duty spring. The lever was pretty hard to pull with the wire. After i've installed the kit and bleed the line and the master cylinder ( That was pretty easy for me, just remove the perch and pump the slave cylinder with a philips screwdriver as recommended by Streamline (took 5 min))... Wow, I can pull the lever with one or two finger. Awsome, very satisfied, worth the money. Great quality and finish. Quote Link to comment Share on other sites More sharing options...
B Rich45 Posted March 19, 2011 Report Share Posted March 19, 2011 Worth it? Quote Link to comment Share on other sites More sharing options...
figaro Posted September 3, 2011 Report Share Posted September 3, 2011 guys where can i get one from ? and is it still working fine ??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.