jaguar1331 Posted November 12, 2010 Report Share Posted November 12, 2010 hey just wondering i have a 04 banshee and have some guy at work with a lt500 with a little over stock bore and basic bolt ons my bike is stock bore but ported and polishe and head is milled and timing is advanced jetted and piped what will it take to beat this guy Quote Link to comment Share on other sites More sharing options...
Phelps Posted November 12, 2010 Report Share Posted November 12, 2010 bored out lt500 and bolt on's? your totally screwed!!! Quote Link to comment Share on other sites More sharing options...
lt_ron Posted November 12, 2010 Report Share Posted November 12, 2010 Need more info Is the zilla ported and by who what year motor does it have 87 or 88 and up and what pipe carb What about your quad gearing pipes carbs were are you guys going to be racing and how far I have raced alot of different setup banshees with my zilla when I had pretty much stock motor to my alky motor with several different pipes so I should have a pretty decent ideal on the out come If it has not been ported and has a fmf on it like most do you should wax it but it depends on his mods Quote Link to comment Share on other sites More sharing options...
df350nos Posted November 12, 2010 Report Share Posted November 12, 2010 When mine was just a 350 I raced a few zillas. I had port work with head and 34mm carbs. and cpi. It was descent running little 350 and I had problems with lts. It would always come down to who got the hole shot on who would win. Quote Link to comment Share on other sites More sharing options...
06specialedition Posted November 12, 2010 Report Share Posted November 12, 2010 just stop being a bitch and race him. Race him and let us know how it goes Quote Link to comment Share on other sites More sharing options...
1bad450r Posted November 13, 2010 Report Share Posted November 13, 2010 hey just wondering i have a 04 banshee and have some guy at work with a lt500 with a little over stock bore and basic bolt ons my bike is stock bore but ported and polishe and head is milled and timing is advanced jetted and piped what will it take to beat this guy as long as your a decent rider and run on pavement you should have no problems walking away from him. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.