Braap_a_Banshee Posted October 5, 2010 Report Share Posted October 5, 2010 i eliminated the tors and installed the included idle screw kit. but it doesnt seem to do anything to adjust the idle... i've got a week and a half to dial my shee in before i head off to pismo so any help will be much appreciated Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted October 5, 2010 Report Share Posted October 5, 2010 You probably need to file down the nub that the idle screw screws into. Just pull you slide out and see how far in it goes. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted October 5, 2010 Report Share Posted October 5, 2010 Like said above, grind it down some more, but don't go overboard. Look at my pics here for reference and start grinding away. http://bansheehq.com/forums/index.php?showtopic=135591 Week and a half you can dial it in 1000 times. Quote Link to comment Share on other sites More sharing options...
pabansheematt Posted October 5, 2010 Report Share Posted October 5, 2010 Or you can take the lock nut off and put a small spring on instead. Without the locknut, the idle screw will turn in further. Quote Link to comment Share on other sites More sharing options...
MILO Posted October 6, 2010 Report Share Posted October 6, 2010 you sure you don't have the slides backwards or flipped? Quote Link to comment Share on other sites More sharing options...
Braap_a_Banshee Posted October 6, 2010 Author Report Share Posted October 6, 2010 they are filed down to 3/4 inch like in the directions Quote Link to comment Share on other sites More sharing options...
Braap_a_Banshee Posted October 6, 2010 Author Report Share Posted October 6, 2010 so if you accidentally switched the left slide to the right carb and vice versa the idle screws will be worthless? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted October 6, 2010 Report Share Posted October 6, 2010 3/4" is alot of meat left. Don't switch the slides or even the bowls on those carbs! Quote Link to comment Share on other sites More sharing options...
Braap_a_Banshee Posted October 6, 2010 Author Report Share Posted October 6, 2010 i may have switched the slides when i eliminated the tors unfortunately... ill take them apart later on today or friday and see what my situation is. im savin up money to invest in pwk 28mm so is goin through all this trouble worth it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.