wkayler Posted October 1, 2010 Report Share Posted October 1, 2010 Just replaced my clutch basket and shifter oil seal and i took my kick start gear off. Now im having trouble getting it to work right. Ive tried for 2 or 3 hours to get it in correct and all it does is turn the motor half way over and the spring wont pull it back up unless i wiggle it a litte bit. Cant get it to fire or function properly. I know its probablt a retarded question but im new to working on banshees so take it easy on me. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted October 1, 2010 Report Share Posted October 1, 2010 Clymers manual is your friend. To many steps for me to try to explain. Spring on gear faces away from gear , straight end of spring goes in slot , Gear spring goes into half moon slot on case ,kick stop arm goes slightly CCW of gear spring , use needle nose pliers turn return spring clocwise hook on spring post. Pages 164 -170. Your results may vary. Quote Link to comment Share on other sites More sharing options...
wkayler Posted October 1, 2010 Author Report Share Posted October 1, 2010 Alright, that was great instructions. Got it all back together kick start works perfect. But now i have another issue...it wont fire. Its been sitting for a month or so and it dont seem to have any spark now. It was running fine when i pulled it in the garage. Quote Link to comment Share on other sites More sharing options...
alf44 Posted October 1, 2010 Report Share Posted October 1, 2010 Drop A LITTLE FUEL IN THE CYLINDERS AND MAKE SURE YOUR PLUGS ARE GOOD, grounds are tight and carb tops, are tight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.