Wheelman Chassis Posted September 20, 2010 Report Share Posted September 20, 2010 prices droped i have a hot rods 4mm ,115 rod crank that is out of my own personal bike im going 10mm . it is in good condition and perfect runable shape. no pics of the crank because the lower half is still in the bike i sold a guy who was running these stock cyl. my cub topend , so the crank i did not pull yet. $250 firm also a set of 68mm big bore domes alil rough but could be polished up and ran, they are 22cc (pistol not for sale haha) $10 aslo for sale a set of like new STELLAR +3 forward stock width drag arms and spindles including tierods and all heims, powder coated mat. silver. im going to a single front a-arm chassis so no need for these $400 all prices are obo and do not include shpping or paypal fees. thanks chris Quote Link to comment Share on other sites More sharing options...
Fastassbanshee96 Posted September 20, 2010 Report Share Posted September 20, 2010 I seen you said the cylinders were ported in Kalamazoo. I live I Michigan and am interested in the crank. Where are you located? Would I be able to pick up in personto avoid shipping and fees? Quote Link to comment Share on other sites More sharing options...
Wheelman Chassis Posted September 20, 2010 Author Report Share Posted September 20, 2010 I seen you said the cylinders were ported in Kalamazoo. I live I Michigan and am interested in the crank. Where are you located? Would I be able to pick up in personto avoid shipping and fees? hey, i am located in belleville michigan. right at the i-94-i-275 crossing, i see your in roseville, i work at diamond racing pistons in clinton township 15 mile and gratiot we could arange a meeting if you would like thanks Quote Link to comment Share on other sites More sharing options...
georgie Posted September 20, 2010 Report Share Posted September 20, 2010 pm sent for A arms. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted September 22, 2010 Report Share Posted September 22, 2010 seen these cylinders in person the other day.... look like they will run hard! look like a good set of dune port cylinders Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted September 22, 2010 Report Share Posted September 22, 2010 do the pistons come w/the cylinders for $200? thanks. Quote Link to comment Share on other sites More sharing options...
Wheelman Chassis Posted September 22, 2010 Author Report Share Posted September 22, 2010 do the pistons come w/the cylinders for $200? thanks. yes sir for 200 i will include the pistons, cylinder, wrist pins and wrist pin bearings. the pistons show som detonation but where running fine. Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted September 22, 2010 Report Share Posted September 22, 2010 yes sir for 200 i will include the pistons, cylinder, wrist pins and wrist pin bearings. the pistons show som detonation but where running fine. ok, i'm really interested. can you take some measurements for me tho? what is the measurement from cylinder deck to the roof of the exh, main trans, sec trans, and boost port? i want to see if the timings are outta league for me etc. also, the bore is totally ok to run? also, if i buy them and they show up not as advertised or they won't work for me, would you refund? thanks. Quote Link to comment Share on other sites More sharing options...
bladesracing Posted September 22, 2010 Report Share Posted September 22, 2010 ok, i'm really interested. can you take some measurements for me tho? what is the measurement from cylinder deck to the roof of the exh, main trans, sec trans, and boost port? i want to see if the timings are outta league for me etc. also, the bore is totally ok to run? also, if i buy them and they show up not as advertised or they won't work for me, would you refund? thanks. Great seller, great guy! Those r my old cylinders, I just bought a set of cubs from him. He installed them for me, and then had me over and we rode for about an hour. Dont worry about him. Like I said great seller and great guy! Quote Link to comment Share on other sites More sharing options...
Wheelman Chassis Posted September 23, 2010 Author Report Share Posted September 23, 2010 ok, i'm really interested. can you take some measurements for me tho? what is the measurement from cylinder deck to the roof of the exh, main trans, sec trans, and boost port? i want to see if the timings are outta league for me etc. also, the bore is totally ok to run? also, if i buy them and they show up not as advertised or they won't work for me, would you refund? thanks. i work nights so its 3 somthing in rhe am now ill grab your numbers in the am for you, the bore is ok to run,there are some marks up and down that will not effect anything, the pistons show detination which is hard on the ring gaps. these where running like i said, the guys squish was all jacked and he was having issues with o rings in the head. if i was doing the motor id replace them for peice of mind. i will stand by all my parts 100 %, however you are responsible for the setup like base gasket thikness, domes , squish, all the builder crap..lol im selling a good useable set of cylinders, the pistons and extras are just through ins.. use them at your discretion. anyone that has done deals with me will confirm im a strait shooter, i give the most accurate info i can and stand behind my stuff. thank and call if yo would like 1734 679 6735 chris Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted September 23, 2010 Report Share Posted September 23, 2010 i work nights so its 3 somthing in rhe am now ill grab your numbers in the am for you, the bore is ok to run,there are some marks up and down that will not effect anything, the pistons show detination which is hard on the ring gaps. these where running like i said, the guys squish was all jacked and he was having issues with o rings in the head. if i was doing the motor id replace them for peice of mind. i will stand by all my parts 100 %, however you are responsible for the setup like base gasket thikness, domes , squish, all the builder crap..lol im selling a good useable set of cylinders, the pistons and extras are just through ins.. use them at your discretion. anyone that has done deals with me will confirm im a strait shooter, i give the most accurate info i can and stand behind my stuff. thank and call if yo would like 1734 679 6735 chris I will give you a call around 10 or 11am. Thanks chris. Quote Link to comment Share on other sites More sharing options...
Wheelman Chassis Posted September 23, 2010 Author Report Share Posted September 23, 2010 I will give you a call around 10 or 11am. Thanks chris. ok for the specs from the deck surace of the cyl. the exhaust port is: 1.135 inches down bottom of port is 2.165 down main transfers are: 1.670 to top and 2.165 to bottom sec transfers are: 1.663 to top 2.185 to bottom intake ports are: 2.970 to top and 3.905 to bottom with the pistons included and no base gasket the pistons stuck aprox. .070 out of the cyl. the domes that where in this setup were wrong so i have no squish info ore base gasket/ spacer info. hope this helps thanks chris Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted September 23, 2010 Report Share Posted September 23, 2010 ok, exh and transfers are ok, but what about the boost port? as long as the roof is lower than the transfers, we're good to go. do you take paypal? would you do $200 shipped? i called you this morning, but no answer. i did leave a message. did you get it? Quote Link to comment Share on other sites More sharing options...
Ryan2002 Posted September 23, 2010 Report Share Posted September 23, 2010 Do you still have the crank if so how much interested Ryanardoin.70581@yahoo.com Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted September 24, 2010 Report Share Posted September 24, 2010 Do you still have the crank if so how much interested Ryanardoin.70581@yahoo.com last time i talked to him he still had it.... he wants 300.00 for it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.