toytech Posted April 26, 2011 Report Share Posted April 26, 2011 what kind of engine cc's can they handle ? I read somewhere on another thread that a guy had them on a 421 cub and said they were awsome Quote Link to comment Share on other sites More sharing options...
bansheeboi Posted May 1, 2011 Report Share Posted May 1, 2011 yup im ordering a pair tonight yall got me sold on them from the looks to performance this is my last set of pipes i think i will buy for a long time Quote Link to comment Share on other sites More sharing options...
SuperMex Posted May 1, 2011 Report Share Posted May 1, 2011 yup im ordering a pair tonight yall got me sold on them from the looks to performance this is my last set of pipes i think i will buy for a long time You will be very, very happy with them Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 1, 2011 Report Share Posted May 1, 2011 Quote Link to comment Share on other sites More sharing options...
T_Shee Posted May 2, 2011 Report Share Posted May 2, 2011 lol. what kinda problems were there with the first design? the chrome on mine is very good. i am extremely happy with them overall once i got the leaking to stop Quote Link to comment Share on other sites More sharing options...
toytech Posted May 2, 2011 Report Share Posted May 2, 2011 I got to run mine a little bit today, what a difference! no loss in bottom, and some gain in mid and a big gain on top end. I am very pleased, they fit very good with no leaks and look awsome. sound great too!!!! I have more leg clearance than I did with the fmf fattys I put liquid teflon on the o rings. Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted May 7, 2011 Report Share Posted May 7, 2011 Are these pipes more for Heavily modded shee's? Or are they kinda like the T5's in a sense. Such as just some minor mods like porting, reeds, cool head, advance timing? From what I keep hearing and reading, these are freakin badass! I wouldn't mind hearing more peopls views and opinions on these particular pipes Quote Link to comment Share on other sites More sharing options...
Coupelx Posted May 7, 2011 Report Share Posted May 7, 2011 Are these pipes more for Heavily modded shee's? Or are they kinda like the T5's in a sense. Such as just some minor mods like porting, reeds, cool head, advance timing? From what I keep hearing and reading, these are freakin badass! I wouldn't mind hearing more peopls views and opinions on these particular pipes they are a mod to top pipe. NOTHING like a t5. Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted May 7, 2011 Report Share Posted May 7, 2011 they are a mod to top pipe. NOTHING like a t5. No, I was just using the T5 for an expample because I know the T5's are used on bikes with similar mods that I mentioned in my last post. What I was getting at, are these pipes more for shee's that have more than just the common mods or...not really? I went on the net and tried to pull Borrink's web page and that sucker is completely jacked! Where can a guy go look into purchasing a set, or reading what the manufacture has to say about them? Quote Link to comment Share on other sites More sharing options...
Coupelx Posted May 7, 2011 Report Share Posted May 7, 2011 No, I was just using the T5 for an expample because I know the T5's are used on bikes with similar mods that I mentioned in my last post. What I was getting at, are these pipes more for shee's that have more than just the common mods or...not really? I went on the net and tried to pull Borrink's web page and that sucker is completely jacked! Where can a guy go look into purchasing a set, or reading what the manufacture has to say about them? They are in the same category as a cpi. I run them on my dune ported stock stroke they pull forever. i usually chicken out and shift. a few run them on servals and the like. borrink has some threads here on BHQ with his contact info. DO NOT BUY ANY FROM MINKIA38 aka MOTORCITYATV on ebay. Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted May 7, 2011 Report Share Posted May 7, 2011 (edited) Roger that. Thxs Coupelx Edited May 7, 2011 by FullThrottle_06' Quote Link to comment Share on other sites More sharing options...
toytech Posted May 7, 2011 Report Share Posted May 7, 2011 No, I was just using the T5 for an expample because I know the T5's are used on bikes with similar mods that I mentioned in my last post. What I was getting at, are these pipes more for shee's that have more than just the common mods or...not really? I went on the net and tried to pull Borrink's web page and that sucker is completely jacked! Where can a guy go look into purchasing a set, or reading what the manufacture has to say about them? pm borrink performance or e-mail m18moore@yahoo.com or call 231 689-0578 mark will usualy answer pm or e mail around 6:00 pm if you call Mark or Cliff will answer the phone Quote Link to comment Share on other sites More sharing options...
bansheeboi Posted May 7, 2011 Report Share Posted May 7, 2011 pm borrink performance or e-mail m18moore@yahoo.com or call 231 689-0578 mark will usualy answer pm or e mail around 6:00 pm if you call Mark or Cliff will answer the phone yea i gave mark a call early in the week about my pipes and mine will be here monday man stop asking an go buy you some pipes and ride them the reviews on these pipes are nice everyone who has them says there great shit i will let you know by the end on the week hopefully cause i have a set of cpis inframe sb and rockets come but i think that rocket are going to be the better pipe an also did yall see the dyno sheet mark has that showed rockets blowing cpi away on topend wow Quote Link to comment Share on other sites More sharing options...
dimwit Posted May 8, 2011 Report Share Posted May 8, 2011 yer, borrinks the go. minkia sucks ass. I got a set of black ones, sent to OZ. 450 + 130 frieght, that's fucken good. can't get a set of fattys here for anywhere close to that. Put 'em on tonight, look sweet, sound sweet. haven't ridden it yet cause waiting for my jets to show up, and fucked my ankle yesterday in a banshee related incident next weekend maybe. Quote Link to comment Share on other sites More sharing options...
toytech Posted May 8, 2011 Report Share Posted May 8, 2011 yea i gave mark a call early in the week about my pipes and mine will be here monday man stop asking an go buy you some pipes and ride them the reviews on these pipes are nice everyone who has them says there great shit i will let you know by the end on the week hopefully cause i have a set of cpis inframe sb and rockets come but i think that rocket are going to be the better pipe an also did yall see the dyno sheet mark has that showed rockets blowing cpi away on topend wow I got mine 2 weeks ago, they are sweet,the test willbe against my buds shee next weekend at silverlake sand dunes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.