DUMBASS Posted August 27, 2010 Report Share Posted August 27, 2010 parts include shipping to usa. paypal fee's NOT included. brand new 40mm aluminum 28" gun drilled drag axle. banshee hubs and sprocket hub. comes with everything you need and all hardware. very well built. jj&a style. 435 vforce2's for stock bolt pattern, excellent shape. 135 full set of marvin shaws: rear hillshooter 13 1/2" screwed in. 180 front set of polished competition shaws. with spacers 240. excellent condition. tyson +14 no-link chromoly swingarm with both chain sliders and pivot bearings chrome cap. 225 set of cases. with no chain damage. JUST got them trenched for 7mm crank. and port matched. comes with stock tranny drum and both shift shafts with good shift forks and star. 235 full drag port stock cyl topend. cyls are 66mm, alcohol cut domes and whiteknuckle billet head. exhaust is around 194* these made 100hp and 55tq with bigbore pipes. on redline racing dyno. cameron at redline ported these. runs VERY hard. he will vouch for them. call him. i paid 650 for topend. pistons are like new. also have base gasket. 600 shipped forged 7mm crank. 115 rods. JUST REBUILT by louie at twister. new bearings. and flywheel end. all ready to go. excellent shape. 500 shipped never ran since rebuilt whiteknuckle billet 1 piece intake with internal crossover. 100 shipped. 2-5 neutral down COMPLETE overide. all bearings. shift forks. drum. all gears. etc. 300 shipped shifts flawless. also have brand new 18.5"x5" full buffs. on new douglas 10x4 wheels...185 polished drag cut front banshee hubs. 65. brand new brake rotor. tusk wave rotor. stainless. 65 brand new lonestar +2 forward. -1 wide. chromoly drag arms. powder coated black. with matching tie rods. [no-ends] and brand new ball joints. never ran 350. drag cut banshee seat. still has plenty of cushion for sand riding. black velvet cover. 125. power pro chrome bigbore small flange. with built in silencers. needs packing. 225 shipped cpi inframe small bores. new black paint. 250 shipped. no silencers _________________________ prices are firm. no need to make offer unless its what u see. thx also have other misc. stuff. pm me for what ur lookin for ....SEND ME EMAIL FOR PICS . I HAVE PICS OF EVERYTHING. free 8x10 glossy of me relaxing after a hard days draggin with every part sold. Quote Link to comment Share on other sites More sharing options...
trademark Posted August 27, 2010 Report Share Posted August 27, 2010 full drag port stock cyl topend. cyls are 66mm, alcohol cut domes and whiteknuckle billet head. exhaust is around 194* these made 100hp and 55tq with bigbore pipes. on redline racing dyno. cameron at redline ported these. runs VERY hard. he will vouch for them. call him. i paid 650 for topend. pistons are like new. also have base gasket. 600 shipped these run with stock crank?? 100hp??? Quote Link to comment Share on other sites More sharing options...
DUMBASS Posted August 27, 2010 Author Report Share Posted August 27, 2010 full drag port stock cyl topend. cyls are 66mm, alcohol cut domes and whiteknuckle billet head. exhaust is around 194* these made 100hp and 55tq with bigbore pipes. on redline racing dyno. cameron at redline ported these. runs VERY hard. he will vouch for them. call him. i paid 650 for topend. pistons are like new. also have base gasket. 600 shipped these run with stock crank?? 100hp??? this topend is setup for a 7mm crank.....but will work with a 4mm with only changing domes. Quote Link to comment Share on other sites More sharing options...
DUMBASS Posted August 31, 2010 Author Report Share Posted August 31, 2010 this topend is setup for a 7mm crank.....but will work with a 4mm with only changing domes. pm me with offers. Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted August 31, 2010 Report Share Posted August 31, 2010 Trans drag only or dunable? Quote Link to comment Share on other sites More sharing options...
strokedokie Posted August 31, 2010 Report Share Posted August 31, 2010 this topend is setup for a 7mm crank.....but will work with a 4mm with only changing domes. I'm new to the whole forum thing can't figure out how to pm with my phone...but how much for cases...crank...and cyl's and pistons? Quote Link to comment Share on other sites More sharing options...
DUMBASS Posted August 31, 2010 Author Report Share Posted August 31, 2010 I'm new to the whole forum thing can't figure out how to pm with my phone...but how much for cases...crank...and cyl's and pistons? overide is not dunable. topend. [cyls.pistons.] 495 shipped cases 210 shipped crank 495 shipped. Quote Link to comment Share on other sites More sharing options...
strokedokie Posted August 31, 2010 Report Share Posted August 31, 2010 overide is not dunable. topend. [cyls.pistons.] 495 shipped cases 210 shipped crank 495 shipped. Thanks bubba...ill be in touch...tryin to sell my stuff to buy yours...thanks Quote Link to comment Share on other sites More sharing options...
DUMBASS Posted September 4, 2010 Author Report Share Posted September 4, 2010 parts include shipping to usa. paypal fee's NOT included. brand new 40mm aluminum 28" gun drilled drag axle. banshee hubs and sprocket hub. comes with everything you need and all hardware. very well built. jj&a style. 435 vforce2's for stock bolt pattern, excellent shape. 135 full set of marvin shaws: rear hillshooter 13 1/2" screwed in. 180 front set of polished competition shaws. with spacers 240. excellent condition. tyson +14 no-link chromoly swingarm with both chain sliders and pivot bearings chrome cap. 225 set of cases. with no chain damage. JUST got them trenched for 7mm crank. and port matched. comes with stock tranny drum and both shift shafts with good shift forks and star. 235 full drag port stock cyl topend. cyls are 66mm, alcohol cut domes and whiteknuckle billet head. exhaust is around 194* these made 100hp and 55tq with bigbore pipes. on redline racing dyno. cameron at redline ported these. runs VERY hard. he will vouch for them. call him. i paid 650 for topend. pistons are like new. also have base gasket. 600 shipped forged 7mm crank. 115 rods. JUST REBUILT by louie at twister. new bearings. and flywheel end. all ready to go. excellent shape. 500 shipped never ran since rebuilt whiteknuckle billet 1 piece intake with internal crossover. 100 shipped. 2-5 neutral down COMPLETE overide. all bearings. shift forks. drum. all gears. etc. 300 shipped shifts flawless. also have brand new 18.5"x5" full buffs. on new douglas 10x4 wheels...185 polished drag cut front banshee hubs. 65. brand new brake rotor. tusk wave rotor. stainless. 65 brand new lonestar +2 forward. -1 wide. chromoly drag arms. powder coated black. with matching tie rods. [no-ends] and brand new ball joints. never ran 350. drag cut banshee seat. still has plenty of cushion for sand riding. black velvet cover. 125. power pro chrome bigbore small flange. with built in silencers. needs packing. 225 shipped cpi inframe small bores. new black paint. 250 shipped. no silencers _________________________ prices are firm. no need to make offer unless its what u see. thx also have other misc. stuff. pm me for what ur lookin for ....SEND ME EMAIL FOR PICS . I HAVE PICS OF EVERYTHING........7mm stuff sold. seat sold. overide sold. 18.5" buffs sold. Quote Link to comment Share on other sites More sharing options...
kawiking Posted September 5, 2010 Report Share Posted September 5, 2010 does the rear shaw have the nut on it to make it.. 13 1/2 ... have a buddy lookin for a 13 ... any FEEDBACK on the forum ? Quote Link to comment Share on other sites More sharing options...
DUMBASS Posted September 7, 2010 Author Report Share Posted September 7, 2010 does the rear shaw have the nut on it to make it.. 13 1/2 ... have a buddy lookin for a 13 ... any FEEDBACK on the forum ? shortest itll go i think is 13.25" without the nut. Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted September 11, 2010 Report Share Posted September 11, 2010 anything bigger than 8x10 ? Quote Link to comment Share on other sites More sharing options...
hawke Posted September 11, 2010 Report Share Posted September 11, 2010 Do you still have the spi sb inframes I am very interested? Thanks Jason Quote Link to comment Share on other sites More sharing options...
baddsheee Posted September 12, 2010 Report Share Posted September 12, 2010 anything bigger than 8x10 ? X2, like an effin gorilla lmao! Quote Link to comment Share on other sites More sharing options...
Vintage Smoke Posted September 12, 2010 Report Share Posted September 12, 2010 Where did you buy the sweater? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.