LiftdT4R Posted August 17, 2010 Report Share Posted August 17, 2010 (edited) Hey, what's up? I havent been on here in a long time, but I am again parting out a bike for a buddy of mine, and I will be slowly posting up the parts as they come off. I will likely start next week. I just wanted to make a quick post to see if anyone LOCAL needs anything, if you do shoot me a PM. If you can come a pick up a part I will give you a heck of a deal. Here's the beauty of a Banshee! About the only thing this bike has going for it is the motor is strong. It has about 110 PSI both cylinders with an MX Dune Port and single carb. Starts on half a kick, idles runs and shifts perfect. Mostly everything else is bent or rusted. Again, I'm trying to sell locally FIRST. I will list the individual parts as they come off if they are not sold locally. Thanks guys!!!! Edited August 17, 2010 by LiftdT4R Quote Link to comment Share on other sites More sharing options...
NYUK Posted August 17, 2010 Report Share Posted August 17, 2010 500 CASH FOR THE WHOLE THING TODAY. CALL JOHN 215 880 1990. work with me. Quote Link to comment Share on other sites More sharing options...
gofast5 Posted August 17, 2010 Report Share Posted August 17, 2010 How much for the cylinders and pistons? Or even the whole motor ill pay for shipping and everything Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 17, 2010 Author Report Share Posted August 17, 2010 500 CASH FOR THE WHOLE THING TODAY. CALL JOHN 215 880 1990. work with me. Come on John really? I was born at night but not last night. I've done a few of these myself too don't forget. Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 17, 2010 Author Report Share Posted August 17, 2010 How much for the cylinders and pistons? Or even the whole motor ill pay for shipping and everything Which New Castle PA, I'm in PA quite a bit, I might be able to work something out. Shoot me a PM of exactly which components your looking for,, (eg. Top end, electrical, crank, cases, carb, etc.) and I'll work something out for you. John, throw in a can of alpo, a coupon for some Ben Gay, and a stale cheeze doodle and we might be able to deal. Quote Link to comment Share on other sites More sharing options...
coreyownz Posted August 17, 2010 Report Share Posted August 17, 2010 im intested in the nerfbars and plastics. and maybe the frame if you have a title Quote Link to comment Share on other sites More sharing options...
ECshee Posted August 18, 2010 Report Share Posted August 18, 2010 so how much for the whole thing? nerfs, plastics, head, carb setup, clamps. if its not being sold as a whole. whats the deal with the motor and cylinders, are they stock bore? Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 18, 2010 Author Report Share Posted August 18, 2010 so how much for the whole thing? nerfs, plastics, head, carb setup, clamps. if its not being sold as a whole. whats the deal with the motor and cylinders, are they stock bore? This is obviously worth much more in pieces than it is whole, so I don't think you'll like the number but I'd have to see 1500 out of it not to part it. I havent got into the motor yet, I was told the cylinders are an MX port and it sure does pull down low so I imagine they are NOT stock bore. Quote Link to comment Share on other sites More sharing options...
gofast5 Posted August 18, 2010 Report Share Posted August 18, 2010 Interested in the nerfs, pipe clamps, and cylinders and pistons any prices? Quote Link to comment Share on other sites More sharing options...
Section00 Posted August 18, 2010 Report Share Posted August 18, 2010 Hey I need to whole top/ botton end foy my banshee and I am located in Nj. I am very interested and would be willing to go pick up the parts tomorrow asap. I dont check my mail on my post too much so if you cant call me than please email me Section00@comcast.net Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted August 18, 2010 Report Share Posted August 18, 2010 I need a stator and a fly wheel.... Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 18, 2010 Author Report Share Posted August 18, 2010 PMs answered. I am trying to deal locally on parts first. EBay and Paypal kill me with their fees. I will list the stuff that isn't sold as it comes off. Thanks guys!! Quote Link to comment Share on other sites More sharing options...
muggzy Posted August 18, 2010 Report Share Posted August 18, 2010 (edited) This is obviously worth much more in pieces than it is whole, so I don't think you'll like the number but I'd have to see 1500 out of it not to part it. You're not gonna get that if everything is bent up or rusted as you say. Edited August 18, 2010 by muggzy Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 18, 2010 Author Report Share Posted August 18, 2010 (edited) You're not gonna get that if everything is bent up or rusted as you say. Uhhhhhh........ I don't think you read my post. Edited August 18, 2010 by LiftdT4R Quote Link to comment Share on other sites More sharing options...
bode1 Posted August 18, 2010 Report Share Posted August 18, 2010 How much for the nerf bars? Where are you located? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.