bob35170 Posted July 14, 2010 Report Share Posted July 14, 2010 I just got a Trinity 2 into 1 intake for my Banshee,but no carb. What I am asking is will a spare 400EX carb work with a .030 over rebuilt Banshee engine. I don't want to flood out the rings with fuel trying to start it for the first time. I have wrote to trinity ,but have never gotten a response yet. The 400 EX carb is factory jetted and ran flowlessily.when it was on my 400ex. It is a 38mm carb and I think factory Banshee dual carbs are 25mm each one right? I really need someone that has done this swap to point me in the right direction. I have rebuilt numerous ATV's in the past but never a Banshee. I don't really care if it hurts my topend that much. I am betting it will still be faster than my 400EX. Thanks for any help........ Quote Link to comment Share on other sites More sharing options...
Sandking Posted July 14, 2010 Report Share Posted July 14, 2010 I could be wrong but the Trinity boot is set up for a 35mm Carb. If the 38 fits you could make it work. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 14, 2010 Report Share Posted July 14, 2010 the problem os the enrichment setup on the 4stroke carbs. 2strokes don't use enrichment, or it can sputter out everytime you hit the gas. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted July 14, 2010 Report Share Posted July 14, 2010 Alright, that was a funny joke. Now who is it that started the fake user account and asked this question? Quote Link to comment Share on other sites More sharing options...
georgie Posted July 14, 2010 Report Share Posted July 14, 2010 I could be wrong but the Trinity boot is set up for a 35mm Carb. If the 38 fits you could make it work. I ended up with the 38 carb. set up, when I ordered a 35mm carb. set up. They can't even get your order right. Quote Link to comment Share on other sites More sharing options...
bob35170 Posted July 17, 2010 Author Report Share Posted July 17, 2010 I could be wrong but the Trinity boot is set up for a 35mm Carb. If the 38 fits you could make it work. U are correct, but I found another company that makes a 2 into 1 intake and they have a boot for a 38mm. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted July 17, 2010 Report Share Posted July 17, 2010 Unless your running a big twin you will see a decrease in performance with a 38mm carb. Quote Link to comment Share on other sites More sharing options...
bob35170 Posted August 1, 2010 Author Report Share Posted August 1, 2010 Unless your running a big twin you will see a decrease in performance with a 38mm carb. I just decided to buy a whole 2 into 1 kit. Its a whole lot easier that way. It has a 35mm carb with the kit. Thanks for the help. Just can't wait to see how much faster is a banshee than my 400EX with a few mods? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.