9banshee6 Posted July 11, 2010 Author Report Share Posted July 11, 2010 huh? idiot Quote Link to comment Share on other sites More sharing options...
9banshee6 Posted July 11, 2010 Author Report Share Posted July 11, 2010 re reading your post - how muc htime do you have on the shee??? YOu do know they have powerbands and are different than a warrior four stroke bike??? and if your bottom end goes, your engine will probably lock up cause a rods melted to the crank not lose power like a top end does..... im 14 k so dont know that much Quote Link to comment Share on other sites More sharing options...
12 0 Clock P I M P Posted July 11, 2010 Report Share Posted July 11, 2010 im 14 k so dont know that much I explained the physical difference of top end and bottom end in your engine in earlier post If you are describing Power loss using Top end and bottom end Top end = High RPM Range Bottom End = Low RPM range There is also a mid range for power just before your power band above your low end rpms....... Power loss can be cause by a lot of things...exactly what area do you feel your losing power???? Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 12, 2010 Report Share Posted July 12, 2010 well, buddy, you have officially been initiated, lol there really is more helpfull info here than anywhere else, but we are also pretty laid back and fun most of the time. search around, and hit the chat/shout. Quote Link to comment Share on other sites More sharing options...
Phelps Posted July 12, 2010 Report Share Posted July 12, 2010 idiot me the idiot? Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 12, 2010 Report Share Posted July 12, 2010 me the idiot? yah idiot Quote Link to comment Share on other sites More sharing options...
9banshee6 Posted July 12, 2010 Author Report Share Posted July 12, 2010 me the idiot? i just wanna learn these thing OK when you got your first shee i bet you didn't know much either why u have to me so messed man? Quote Link to comment Share on other sites More sharing options...
gotta_goatsfast Posted July 12, 2010 Report Share Posted July 12, 2010 Read, search, read, search... and when you feel your eyes burn and people start calling you saying "I haven't seen you for days", you know you're half way there! want to know what your banshee engine is doing with all that air? This will explain it. http://www.howstuffworks.com/two-stroke.htm Here's an animation of how two strokes work. Its okay to ask questions, this is what online forums are mainly for. It is, however, annoying for some of the members of a forum to have to explain simple questions or give answers over and over again when one could search a little and answer his own question. My advise is to search and read up on everything banshee and banshee related. Because your first post is hard to understand. Have fun with your banshee! Quote Link to comment Share on other sites More sharing options...
Pasi S. Posted July 12, 2010 Report Share Posted July 12, 2010 Read, search, read, search... and when you feel your eyes burn and people start calling you saying "I haven't seen you for days", you know you're half way there! want to know what your banshee engine is doing with all that air? This will explain it. http://www.howstuffworks.com/two-stroke.htm Here's an animation of how two strokes work. Its okay to ask questions, this is what online forums are mainly for. It is, however, annoying for some of the members of a forum to have to explain simple questions or give answers over and over again when one could search a little and answer his own question. My advise is to search and read up on everything banshee and banshee related. Because your first post is hard to understand. Have fun with your banshee! x2! ..and when people are saying "search and read" it doesn´t mean that you can´t ask things. If you use search you can find your answers in no time and you don´t have to wait. I have been here reading and searching 30minutes to 6 hours in a day almost everyday! I want to know everything about my Banshee!! You are 14 years old, you can read and your brains can handle lots of information - so here you go! BansheeHQ! -Pasi S. Quote Link to comment Share on other sites More sharing options...
brugal Posted July 12, 2010 Report Share Posted July 12, 2010 Usually, when somebody comes into the motherfucking TECH forum asking a question. Its because they want a serious answer. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted July 13, 2010 Report Share Posted July 13, 2010 Usually, when somebody comes into the motherfucking TECH forum asking a question. Its because they want a serious answer. haven't you been keepin up with the forum the last few months? we aren't nice or serious as much anymore. it's bad for buisiness Quote Link to comment Share on other sites More sharing options...
Phelps Posted July 13, 2010 Report Share Posted July 13, 2010 i just wanna learn these thing OK when you got your first shee i bet you didn't know much either why u have to me so messed man? actually by the time i was 14 i was building 2stroke engines myself. i was raised my a master gm tech that also loved dirtbikes, 3wheelers, quads etc. i was building and updating 700r4's when i was 16. call me lucky, or arrogant, or even a idiot, but seems to me i know when my topend is bad, or my bottom end........ lmao am i really arguing with a pup? Quote Link to comment Share on other sites More sharing options...
banshee67 Posted July 13, 2010 Report Share Posted July 13, 2010 and i really hope your being serious on that cause i thought this site was where one asks a question and another helps them out even thoe if the questions is stupid. I dont know about shees that much im 14 years old ok. and i really like them and wanted to find out these stuff . hu........ some helping site this is hey i am only 15 myself and recently aquired my own banshee. two strokes are easier to learn than a four stroke to start with. and they are pretty easy once you get the gang of it. if you have any questions let me see if i can help you out. Quote Link to comment Share on other sites More sharing options...
toytech Posted July 13, 2010 Report Share Posted July 13, 2010 actually by the time i was 14 i was building 2stroke engines myself. i was raised my a master gm tech that also loved dirtbikes, 3wheelers, quads etc. i was building and updating 700r4's when i was 16. call me lucky, or arrogant, or even a idiot, but seems to me i know when my topend is bad, or my bottom end........ lmao am i really arguing with a pup? yes you are he is 14 yrs old, and has a question just didn't know how to ask it correctly, some of us were fortunate enough to grow up working on things others were not. Quote Link to comment Share on other sites More sharing options...
323manshee Posted July 14, 2010 Report Share Posted July 14, 2010 ok if you top end goes you'll have bottom power just no top end right if bottom end goes you'll have top end power but no low end power right? cause my dads warrior no only runs half of what it use to it but still has tourqe thats the transmission right my banshee has no low end power put one you get the rpm up it pulls hard that should be my tranny right but some one told me i need a top end this shiz is weird ! EXPLANATION!!! I just wanna throw it out there that the low rpm power lag is to an extent a normal sympton of two stroke engines. Four pokes on the other hand don't have this lag but aren't exciting like our banshees. Read on and goodluck bro. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.