iceman Posted June 24, 2010 Report Share Posted June 24, 2010 Hey guys, I have a 03 Banshee that is stock besides removed airbox w/K&N pods, FMF Gnarlies and some reed spacers. The main jets in there were 240s and the pilots were 25s. It ran okay but while I was looking through the jetting sticky I saw a lot of people running higher jets with these mods so I bought some 280 mains and 27.5 pilots, installed them, and now the bike won't even start. I'm not sure what's going on. I put the carbs back together correctly and they are synced. If I remember correctly there was a choke tube that went in between the carbs - I lost this...not sure if that's my problem. The plugs are wet after kicking it for a while. Not sure what to do. I figured the 280s would improve my performance. My elevation is sea level, my air screws are 2.5 turns out. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
pr0blumz Posted June 24, 2010 Report Share Posted June 24, 2010 (edited) If I remember correctly there was a choke tube that went in between the carbs - I lost this...not sure if that's my problem. That's your problem. Edited June 24, 2010 by pr0blumz Quote Link to comment Share on other sites More sharing options...
iceman Posted June 24, 2010 Author Report Share Posted June 24, 2010 That's your problem. That was it, I cut some coolant hose for it. Thanks man. I have no idea where that damn tube went. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.