Fearnot Posted June 20, 2010 Report Posted June 20, 2010 Need jetting help, Banshee is starting first kick and idles fine when let off in first its bogs pretty bad then cuts off. air screw is 2 turns out with 330 main jet, needle middle clip 25 pilot jet. Mods are Pods/ptr mids and nology coil and hot wires if that helps any. 560 feet above sea level humid as hell high 70's low 80's. Thanks for your time. Quote
fastbanshee8 Posted June 20, 2010 Report Posted June 20, 2010 You need some 27.5 pilot jets. This is pretty much a requirement, when installing after market exhausts. Quote
Fearnot Posted June 20, 2010 Author Report Posted June 20, 2010 I got some I'll go and try them out thanks fastbanshee, good looks to you sir. Quote
Fearnot Posted June 20, 2010 Author Report Posted June 20, 2010 Jets are in and it's running a lot better now just need to rip on it a bit now. Quote
fastbanshee8 Posted June 20, 2010 Report Posted June 20, 2010 That's good. You may have to re-adjust the air mixture screws a bit. Quote
GrMeyer Posted June 20, 2010 Report Posted June 20, 2010 Make sure you resync the carbs as well. Having them out of sync will cause a hard time dialing in the bottom end. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.