jar banshee 01 Posted June 1, 2010 Report Share Posted June 1, 2010 Dose anyone like these things? Got one never put it on, any one have a picture of one on the bike. just want to see one on. thanks Quote Link to comment Share on other sites More sharing options...
dajogejr Posted June 1, 2010 Report Share Posted June 1, 2010 If you ride motorcross and HP isn't as important as suspension/handling, they're ok. That being said, we took one off my buddies banshee and it felt like it gained 15 HP, no joke. And yes it was setup and adjusted properly... Too much drag on the drivetrain in my opinion... Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted June 1, 2010 Report Share Posted June 1, 2010 If you ride motorcross and HP isn't as important as suspension/handling, they're ok. That being said, we took one off my buddies banshee and it felt like it gained 15 HP, no joke. And yes it was setup and adjusted properly... Too much drag on the drivetrain in my opinion... I agree, i used to run one on my trail bike for a bit, took it off and sold it to a kid down the way and never looked back. Quote Link to comment Share on other sites More sharing options...
jar banshee 01 Posted June 2, 2010 Author Report Share Posted June 2, 2010 dont ride to much moto cross. but do lots of jumping i herd it gets rid of chain slack, but i dont know. may be i will test it out Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted June 2, 2010 Report Share Posted June 2, 2010 I agree, i used to run one on my trail bike for a bit, took it off and sold it to a kid down the way and never looked back. X2 Quote Link to comment Share on other sites More sharing options...
camatv Posted June 2, 2010 Report Share Posted June 2, 2010 if you have too much chain slack tighten your chain!! also make sure youhave the rollers on the frame to hold it up seen that a LOT. those links are a decent idear but impractical as was said they just waayyyy to much drag.. Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted June 2, 2010 Report Share Posted June 2, 2010 if you have too much chain slack tighten your chain!! also make sure youhave the rollers on the frame to hold it up seen that a LOT. those links are a decent idear but impractical as was said they just waayyyy to much drag.. Perfect fucking thread for you to post in.. Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted June 2, 2010 Report Share Posted June 2, 2010 ROTFLMFAO Quote Link to comment Share on other sites More sharing options...
jar banshee 01 Posted June 2, 2010 Author Report Share Posted June 2, 2010 been riding banshee since 01, i know if my chain lose or not!!! seen this thing bought it for 20$ so i thought what the hell i try it out! if you think i am a dummy riding with a lose chain your srewed in the head retard!!! Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted June 2, 2010 Report Share Posted June 2, 2010 Quote Link to comment Share on other sites More sharing options...
AKheathen Posted June 2, 2010 Report Share Posted June 2, 2010 funny you should bring this up now.........i bought one this winter for like $25 to just check out. plainly put- the geometry is fucked, and i had an issue with it putting far too much side load on the bearings. idk if ther is little race spacers missing bertween the bearings, but i had to back the locknuts off just enough that the rollers would spin. i'm gonna try out a few things to see if i can make mine work when i fly back home in 3 weeks. but anyways, i would use locktite on the damn locknuts. mine came loose and chewed up my new chain a bit. you have to remove the swingarm nut and use that to bolt it on, plus the hole in the frame above it. the chain goes over the top of the top roller, and under the bottom of the bottom roller. you need to remove the chain slidder , or the rollers will not move. you have to knotch the stator cover to clear, and remove the stock bogie wheel. i could not find any install literature on their site, but that is what i found out by trial/error. Quote Link to comment Share on other sites More sharing options...
jar banshee 01 Posted June 2, 2010 Author Report Share Posted June 2, 2010 (edited) thanks man! ya gonna put it on try it out see if i like it, if not its for sale. if it robs hp i dont want it on. Edited June 2, 2010 by jar banshee 01 Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted June 3, 2010 Report Share Posted June 3, 2010 ROTFLMFAO X-2 on that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.