Jump to content

Opinions on gear for dunes


Recommended Posts

Ok me and a few buddies are headed to lil sahara for the first time June 3rd. I JUST put a duneable n down 1-5th in and I'm wondering will I need 6th in the dunes? I'm thinking I might need to put stock tranny back in??!? Someone chime in and let me know. Thanks

Link to comment
Share on other sites

Ok me and a few buddies are headed to lil sahara for the first time June 3rd. I JUST put a duneable n down 1-5th in and I'm wondering will I need 6th in the dunes? I'm thinking I might need to out stock tranny back in??!? Someone chime in and let me know. Thanks

 

I NEVER use 6th gear at glamis with stock gearing. Unless i'm WOT in the flats, but that just gets stupid in the sand sometimes. Usually I hover between 3rd and 4th, sometimes into 5th. I think you'll be perfect with the 1-5.

Link to comment
Share on other sites

Little Sahara at Waynoka, Oklahoma, I'm guessing. If so, I've been there many times, and there really aren't many places to use all 6 gears. In all my trips down there, which is probably 50, or so, I think I've gotten into 6th a handful of times, at the most.

Link to comment
Share on other sites

Sounds good! I really didn't wanna tear it back down. Lol. I'll throw on my stock rear sprocket (I'm 14-44 now) and it should work out. If not I always have my 15 tooth front to try out. One of the guys I'm going with went last year and he keeps telling me Ima be hunting another gear and Ima hate it. Hater lol

Link to comment
Share on other sites

Little Sahara at Waynoka, Oklahoma, I'm guessing. If so, I've been there many times, and there really aren't many places to use all 6 gears. In all my trips down there, which is probably 50, or so, I think I've gotten into 6th a handful of times, at the most.

yes, sorry. It is LS, OK. Thanks for the responces Guys. I really want this trip to go well and not be upset or dissapointed with my setup. Basically it WAS a drag bike, 4 mill FaST drag ported motor, 8 over arm, I have 10 paddle extremes and itp sandstar fronts. Trading my CPI oof's for some shearer inframes tomorrow.

Link to comment
Share on other sites

My last trip down was a disappointment, because one side of my coil quit on me, but that's really the only time I've had mechanical problems. Good luck, have fun, and be safe.

 

Ouch! man that sucks... hopefully you had means to get another while there..... thanks and ima sure ill have a blast....

Link to comment
Share on other sites

I had to buy one down there, and it was almost at double what I could get one for, here at home, so take any spare parts you think you might need. Also, you really have to watch out for others, as many people tend to get really stupid down there, and do things like jumping dunes, without somebody on the top, watching for others coming up the backside.

Link to comment
Share on other sites

yes, sorry. It is LS, OK. Thanks for the responces Guys. I really want this trip to go well and not be upset or dissapointed with my setup. Basically it WAS a drag bike, 4 mill FaST drag ported motor, 8 over arm, I have 10 paddle extremes and itp sandstar fronts. Trading my CPI oof's for some shearer inframes tomorrow.

this is often debated but with that long of a swinger you dont have enough paddles.

 

i run 10 paddles on my trail paddles with a 4 over and spin pretty good.

 

also if your tires are 22 inch tall 15-41 out of first gear works pretty good.

 

again i dont know what kind of power your putting down with that motor. but this is what ive experienced.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...