Jump to content

2010 BansheeHQ Ride Little Sahara, OK in October


Recommended Posts

  • Replies 846
  • Created
  • Last Reply

Top Posters In This Topic

which bikes were the f.a.s.t. built gas 4 mill stock cylinder motors out there?

 

what i always think is funny is the bikes that should get respect for what they really are dont get any respect.. who built the bikes newt was riding? those are the ones i was most impressed with overall.

Link to comment
Share on other sites

which bikes were the f.a.s.t. built gas 4 mill stock cylinder motors out there?

 

what i always think is funny is the bikes that should get respect for what they really are dont get any respect.. who built the bikes newt was riding? those are the ones i was most impressed with overall.

 

 

Exactly! Im not just agreeing because Cam is my builder, but you bought up a good point Cam. The bikes Newt was riding and beating a majority of the full out drag bikes with, nobody knows who built those. And like ur 525 cheetah, that bike didnt even run 2 days before sandfest! Which brings me to another point, Cam ur 480 is a bike built with a bunch of thrown together parts and basically a mix and match that dominates. Cam, uve built some amazing running machines and that includes my bike. My lil 4mill cub on pumpgas wit 22cc domes held its own and was even faster when Newt was riding it.

Link to comment
Share on other sites

i beat the slow one as well. i guess i didn't see the red one. i only raced a black one and a blue yfz 450. the were actually both about the same, but when they ran out of nitrous one became slower than the other.

I was on the blue yfz lot of good racin! Nice to match up and have fun. I also had the black rigid yfz neither of my bikes run NOS

Headin down for thanksgiving lets play

Link to comment
Share on other sites

I was on the blue yfz lot of good racin! Nice to match up and have fun. I also had the black rigid yfz neither of my bikes run NOS

Headin down for thanksgiving lets play

hey nice to meat you and that was kind of 2 post smashed together. you would have to read every post to figure out what i was talking about. the nitrous comment was on the Can Am and then i was saying i never raced a red 450 that i knew of only i am guessing your 2 bikes. if i remember right the blue one i beat pretty often, but the black one was giving me fits depending on rather i got out of the hole without standing mine up. either way both bike were fast :headbang:

Link to comment
Share on other sites

Well, I just watched the video and I guess that was me on my bike. The picture is too grainy to tell. I think the was the first race when I missed the 3rd to 4th shift. What happened to the video of the next 2 races? Those are the ones I wanna see! Lol!:headbang:

 

Spurdy you missed 3-4 shift in that video with an override :whoa: ?? I didnt see it. I did see me let out of it for about 10 feet to keep it under control. No biggie, you finally beat the Tractor on the next 2 runs. But all im saying is when/if you beat our 4mm Gas bikes comparible buld to yours then your doing something. We had several out there and 3 of them i cant touch with the Tractor and 2 of them dont even have overrides. Hey, its all in good fun and i will gladly drink a beer with ya after the sands falls win or lose. We are all here for the same reason.. We enjoy working on, riding, racing, ribbing friends on hq, and bsing with friends with ATVs. :cheers:

 

 

which bikes were the f.a.s.t. built gas 4 mill stock cylinder motors out there?

 

There were several but this one is one that did more racing:

 

Dave's wife's F.A.S.T. 4mm on GAS vs. F.A.S.T. 350 alky drag frame

th_VID00092.jpg

 

 

what i always think is funny is the bikes that should get respect for what they really are dont get any respect.. who built the bikes newt was riding? those are the ones i was most impressed with overall.

 

The Red/Yellow bike ran good especially with the lil guy on it. Is that newt that wieghs about 115lbs?? Whoever the lil guy is he could really ride!

Link to comment
Share on other sites

D&M can build a motor, no doubt.

 

Update: Just found out why my bike was running like pooo, getting hot and going into deto... Went to purge it today.. wouldn't fire... Heard a clicking sound from the flywheel.. First thing I thought of was Tylers bike. Take off the flywheel cover and my damn stator plate came loose. Thing was running at max timing! lol So I had a slight air leak along with extreme timing all weekend.. lol Damn.. now I wonder what it could have done with the plate set at the right timing and no air leak.. lol

Link to comment
Share on other sites

D&M can build a motor, no doubt.

 

Update: Just found out why my bike was running like pooo, getting hot and going into deto... Went to purge it today.. wouldn't fire... Heard a clicking sound from the flywheel.. First thing I thought of was Tylers bike. Take off the flywheel cover and my damn stator plate came loose. Thing was running at max timing! lol So I had a slight air leak along with extreme timing all weekend.. lol Damn.. now I wonder what it could have done with the plate set at the right timing and no air leak.. lol

 

 

i must have missed it, what was the air leak? ive had my timing plate come loose before as well

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...