Jump to content

Recommended Posts

Posted

ok i bought a bike with the 9 plate nmotion/ wiseco clutch set up in it. i rode it one time and its was sapposed to have 1 other ride on it on the new clutch set up ( i do believe that!)

 

it stoped shifting and i took the cover off to kinda see what was happening the backing plate had blown off and the cusions were scatterd all over the inside of the motor. ( YIKES!) now i am not new to blowing backing plates off. but NOT with the stock spring steel backing plates!! this is a 80hp bike with a lot of tq so no big deal. NOW i noticed that wiseco is reusing the stock backing plate, GREAT!! BUT they are bolting it on with teeny tiny lil ity bitty weenie ass POS bolts!!! what the hell!! i almost couldnt even see them in the debris!!! i have now fixed the backing plate/ basket with 8mm/1.25 bolts and after pulling the motor and splitting it will install a new clutch basket..

 

SOOOO IF YOU HAVE A wiseco basket REMOVE IT NOW and install / mod the backing plate and basket to use the larger bolts IF YOU R bike makes ANY power i bet the backing plate has snapped those lil bitty teeny time shit ass designe'd bolt's heads off and your plate is eating away at your cases..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...