Loc Posted April 22, 2010 Report Share Posted April 22, 2010 I just installed a set of lonestar +2 a arms. I can tell that is has pushed the front tires forward about two or three inches. Is this normal or did I do something wrong. Thanks. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted April 22, 2010 Report Share Posted April 22, 2010 I just installed a set of lonestar +2 a arms. I can tell that is has pushed the front tires forward about two or three inches. Is this normal or did I do something wrong. Thanks. Sounds like you put the arms on the wrong side. Try changing them from one side to the other bud Should be +1 forward per side and +2 out per side. Quote Link to comment Share on other sites More sharing options...
Loc Posted April 22, 2010 Author Report Share Posted April 22, 2010 I am adding some pics. This is on the right side. I hope I didn't put them on backwards. I bought a banshee that these came on so I switched them out onto my bike. I thought I was doing the smart thing by taking off the a-arm and putting it right onto my bike so I wouldn't mix them up. Now I am thinking what if someone else put them on backwards. Quote Link to comment Share on other sites More sharing options...
jayzx10r Posted April 22, 2010 Report Share Posted April 22, 2010 I just installed a set of lonestar +2 a arms. I can tell that is has pushed the front tires forward about two or three inches. Is this normal or did I do something wrong. Thanks. I just looked at mine...your good. Think about it...if you put the lower on the other way, it would be behind the original wheel position. Did you set it up according to Lonestar specs? http://www.lsracing.com/img/Guide_21.pdf If it was installed wrong, you couldn't attain the proper camber/toe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.