red360 Posted April 3, 2010 Report Share Posted April 3, 2010 what products do yuou guys use to clean your shee? degreaser simple green ? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted April 3, 2010 Report Share Posted April 3, 2010 Soap and water out of a hose not a pressure washer. Normal engine degreaser once a year if theres nasty stuff on the engine over time. I let it soak in then scrub it all with a metal tooth brush type brush. Then rinse. Quote Link to comment Share on other sites More sharing options...
SheezFast02 Posted April 4, 2010 Report Share Posted April 4, 2010 Careful with engine degreaser around any bearings. Also use caution if you must wash with a pressure washer. A pressure washer won't normally cause you any probs, though. I use one day in/day out on car engines, have for years. Just keep a safe distance and you'll be fine. Quote Link to comment Share on other sites More sharing options...
SD1026 Posted April 4, 2010 Report Share Posted April 4, 2010 i use a citrus cleaner and a hot powerwasher with a 40 degree nozzle. then wd 40 like nobodys buisness. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted April 4, 2010 Report Share Posted April 4, 2010 I don't know what they put in the filter cleaner bottle for K&N Air filters...but it works awesome on everything...period. Quote Link to comment Share on other sites More sharing options...
TwistedSheeRida Posted April 4, 2010 Report Share Posted April 4, 2010 The white purple power jug from wal mart mixed in a spray bottle with water. I hose all the mud and loose stuff off first than i coat it with the purple power let it sit for a couple mins and rinse off. I then spray it again and wipe with a rag. Heavy caked on grease by the exhaust if theres any i use Engine Gunk the Gel formula works king. Most of the time i just use car wash soap put a little in a bucket and use a loofa to dunk and wash the banshee. I tip mine up on the rear wheels a lot to to get under the motor and the a arms etc. After its clean, polish on the billet and chrome and WD40 on all the black parts i can find it really gives them a glossy finish. Quote Link to comment Share on other sites More sharing options...
joee20002 Posted April 4, 2010 Report Share Posted April 4, 2010 I don't know what they put in the filter cleaner bottle for K&N Air filters...but it works awesome on everything...period. x2 on that....... Quote Link to comment Share on other sites More sharing options...
FrankieSquid Posted April 7, 2010 Report Share Posted April 7, 2010 If a pressure washer is what your going to use just be carefull around seals and things that are sensitive. I used a pressure washer once then my shift shaft seal started to leak. I used a general hose with a mild degreaser and hot soapy water and as well as a wire and soft brushes Quote Link to comment Share on other sites More sharing options...
tundish2800 Posted April 7, 2010 Report Share Posted April 7, 2010 i use the house on the side of the house and spray it off. then wipe it dry. I try not to get it dirty i hate cleaning Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.