trail rider Posted April 1, 2010 Report Share Posted April 1, 2010 2001 yamaha banshee, has +2+1 lonestar a-arms, TCS front shocks, steel braided front brake lines, Toomey T5 pipes and silencers, tors removal kit, pro design air filter and adaptor plate, full chassis aluminum skid plate, gripper seat cover, maxxis razr2 tires all around. I rebuilt this banshee from the frame up as a little restor project........frame and swingarm/carrier, all new bearings and seals in the swingarm and axle carrier, new chain and sprockets (14/41 gearing) with x-ring chain. the motor is all stock except for a aftermarket clutch kit and stainless steel side cover allen head bolts. was told by the previous owner that its on the origional bore, but I dont know for sure since ive not pulled the head, the pistons look clean with no blowby on the exhaust and intake. runs excellent and will idle all day, start first kick easily every time. good brakes front and rear with good pads. the bike has been gone over bottom to top, front to rear and needs nothing at all. I have always ran klotz benol mixed at 32:1 since ive had the bike. make a good trail shee for somebody. its a nice bike, but im just looking for a 450 to use for some xc racing. asking $2900 for it, or trade for a honda or yamaha 450 fourwheeler. im located in Park City, Ky 42160 Quote Link to comment Share on other sites More sharing options...
trail rider Posted April 1, 2010 Author Report Share Posted April 1, 2010 EDIT: ment so say that the frame, swingarm/carrier has fresh powdercoat. frame has been cleaned up/gusseted, and cdi/electrical harness all cleaned up and moved under the gas tank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.