Jump to content

Another 300ft sand drags gearing question


mikeymuy

Recommended Posts

what set-up gearin should i be runnin for 300ft sand drags? i got stock set-up right now.. its a 370long rod dune port,35mm carbs ,cpi,vf3, +4 swingarm ,21x10 9 paddle tires on 8 inch wheels. my best time has been 5.42et wit 60ft time of 1.934 i weight 180 is that about what i should be runnin? sometimes feels like towards the end of the track it slows down... help needed thanks guys

Link to comment
Share on other sites

Start out with 15/44 and launch in second. You want to be at WOT and the end of 5th gear through the traps.

You don't need 1st or 6th on a banshee in 300 feet.

If you're hitting 6th gear...you're losing time.

9 paddles shouldn't be too much for your bike...

You very well might be running out of fuel at the end.

What is your fuel system/setup?

Stock fuel valve?

Link to comment
Share on other sites

The chain would most likely not work. You'll need to add a half link. 14/41 and 15/44 is the same ratio. You probably won't notice that much difference with your set up. The bigger back sprocket puts more "leverage" on the axle, providing more torque, I think.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...