Jump to content

banshee turns off


USCDUNER

Recommended Posts

hey whats up new to the hq great site well i have a 04 with a cool head t6 pipes bike runs idles ok but it will turn off once it gets hot any tips thanks

 

 

Sounds electrical for sure. Stator or CDI. I recommend you meter test the stator when cold, then run it until it shuts off and retest the stator. It may also be wise to just swap CDIs with a buddy and see if it fixes it. Heat related electrical failures are difficult to pinpoint at times.

 

 

Mull Engineering

Link to comment
Share on other sites

2 things to look at.....the wires have been known to melt on the exhaust, by the side of the air box where they are supposed to clip in. and you can give the cdi the smack test, and see if the spark comes back. other than that- remove your flywheel cover and look for water/rust in there

Link to comment
Share on other sites

2 things to look at.....the wires have been known to melt on the exhaust, by the side of the air box where they are supposed to clip in. and you can give the cdi the smack test, and see if the spark comes back. other than that- remove your flywheel cover and look for water/rust in there

 

 

 

The CDI is an all digital, encapsulated circuit so smacking really won't offer much but the plug could have a contact problem. I am reaching for the popcorn to see what happens on this one. My money is on the CDI at this point but who knows. Could easily be a wiring issue...

 

 

 

B

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...