NickisGod Posted March 25, 2010 Report Posted March 25, 2010 bought a billet brake hub off ebay for i think 60 bones shipped. it arrived fine, looked nice but wouldnt sit flush on my lonestar axle. it was only like a 1/8 gap so i had to grind it with a bit to allow slide to the end of the axle. all is good now, but its always a downer seeing parts being cut and ground straight out of the package. i would of returned it but idc enough its fine now lol Quote
boneyardbanshee. Posted March 25, 2010 Report Posted March 25, 2010 Same problem, same axle. Also had to grind the spacers for the axle to get the boss wheel hubs on. But it looks sick now and am happy. Quote
joee20002 Posted March 28, 2010 Report Posted March 28, 2010 i have owned many boss parts and it all been junk.......................................... Quote
NickisGod Posted March 29, 2010 Author Report Posted March 29, 2010 i also own a boss billet sprocket hub, its pretty nice actually. i wouldnt call them junk, they make some decent parts for the price. you get what you pay for. Quote
boneyardbanshee. Posted March 31, 2010 Report Posted March 31, 2010 I agree, I own all the hubs, they are nice peices and they are good quality. Some mods were needed but I got the whole setup for about the cost of a LSR sprocket hub so I can't complain. I would have spent well over twice as much to have all LSR products, I am happy with just having the axle. Quote
NickisGod Posted April 1, 2010 Author Report Posted April 1, 2010 yupp. lonestar is sick no doubt but its like buying parada Quote
camatv Posted April 2, 2010 Report Posted April 2, 2010 there is a reason the lonestar, cascade stuff is so expensive. its the best . Quote
shanYE west Posted April 2, 2010 Report Posted April 2, 2010 i have owned many boss parts and it all been junk.......................................... Hey Joe, Could you resize your sig pic... its beyond huge. back onto topic.. I've had a few boss parts.. they fit pretty good for the most part. Quote
87sheerips Posted April 2, 2010 Report Posted April 2, 2010 Man, I hate hearing about poor quality. I am seriously trying to get into more and more products that will be excellent quality at a reasonable cost. Shoot me PM's guys if you have any ideas for me to make your life easier. Quote
shawn941 Posted April 10, 2010 Report Posted April 10, 2010 bought a billet brake hub off ebay for i think 60 bones shipped. it arrived fine, looked nice but wouldnt sit flush on my lonestar axle. it was only like a 1/8 gap so i had to grind it with a bit to allow slide to the end of the axle. all is good now, but its always a downer seeing parts being cut and ground straight out of the package. i would of returned it but idc enough its fine now lol mine fit quit nicely with my g-force axle and rad carrier..... Quote
NickisGod Posted April 10, 2010 Author Report Posted April 10, 2010 sounds like you got luck, at one time I was set on getting a g force axle untill I found a brand new lsr axle being auction of for diirt cheap. Besides the price, during my build thhan were out of g force axles and my friend ended up buying one once they returned. honestly the g force axles didn't impress me, I dislike the locknut ontop of the c ring clips they manufacture there axles with. An axle is an axle, they all do the same thing its just my preference. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.