jimp1967 Posted March 19, 2010 Report Share Posted March 19, 2010 I bought a Banshee from a guy and it pulled good only up top, run like crap down low. I brought it home and pulled the carbs off and rebuilt them and went with 320 mains, 27.5 pilots, stock needles in the middle groove, air screws 1.5 off seat. I also installed a timing plate and set it at +4, it has T-5 pipes,VF3 reeds, cool head,pod filters,tors delete, trail port,sea level,68 deg. I bought a snail tool and synced the carbs. I took it for a spin down the street and man that thing screams!! Midrange is great, it pulls sweet all the way through! I rode it around the block a few times and brought it back in the garage and pulled the plugs. The plugs are a little dark but I let it idle for a while when I synced the carbs. I'm going to put a fresh set of plugs in tomorrow and run it and do and plug reading. I'm new to the Banshee so I have a question, when I hammered it the bike was smooth as glass all the way from take off to wide open throttle but I noticed a few times when I got off the throttle I felt a small vibration as the engine was coming down, is this a normal thing? Jimmy Quote Link to comment Share on other sites More sharing options...
VegasJeff Posted March 19, 2010 Report Share Posted March 19, 2010 yeah it's normal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.