jetboat1971 Posted February 28, 2010 Report Share Posted February 28, 2010 Is there anyone who can help with getting this jetted or at least give me a good starting point? the engine is 68mm bore 10mm stroker with 38mm pwk's andthey have 5.5 slides in them also it has V-force reeds 21cc domes the stator plate is a +6.5 degrees of timing and I have Trinity stage 4 pipes Quote Link to comment Share on other sites More sharing options...
firebanshee Posted February 28, 2010 Report Share Posted February 28, 2010 Is there anyone who can help with getting this jetted or at least give me a good starting point? the engine is 68mm bore 10mm stroker with 38mm pwk's andthey have 5.5 slides in them also it has V-force reeds 21cc domes the stator plate is a +6.5 degrees of timing and I have Trinity stage 4 pipes To be safe i would start at a 160 on the main and 55 on the pilot. Quote Link to comment Share on other sites More sharing options...
VegasJeff Posted March 1, 2010 Report Share Posted March 1, 2010 Is there anyone who can help with getting this jetted or at least give me a good starting point? the engine is 68mm bore 10mm stroker with 38mm pwk's andthey have 5.5 slides in them also it has V-force reeds 21cc domes the stator plate is a +6.5 degrees of timing and I have Trinity stage 4 pipes isn't a 68mil bore x10 mil stroke a 465cc? Quote Link to comment Share on other sites More sharing options...
firebanshee Posted March 2, 2010 Report Share Posted March 2, 2010 isn't a 68mil bore x10 mil stroke a 465cc? He is talking about a cheetah cylinder, not a cub, it's bore is 74.5mm. Quote Link to comment Share on other sites More sharing options...
camatv Posted March 5, 2010 Report Share Posted March 5, 2010 he says in the description its a 68mm bore cub thats not a 535 even the 74.5mm is larger than the 535.. if its a cub and its that big its a super cub. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted March 5, 2010 Report Share Posted March 5, 2010 He is talking about a cheetah cylinder, not a cub, it's bore is 74.5mm. oops! my bad Quote Link to comment Share on other sites More sharing options...
Blewbyu Posted March 5, 2010 Report Share Posted March 5, 2010 Here you go. lol http://www.havocperformance.com/ENGINECALCULATOR.htm Quote Link to comment Share on other sites More sharing options...
Banchetta Posted March 5, 2010 Report Share Posted March 5, 2010 Is there anyone who can help with getting this jetted or at least give me a good starting point? the engine is 68mm bore 10mm stroker with 38mm pwk's andthey have 5.5 slides in them also it has V-force reeds 21cc domes the stator plate is a +6.5 degrees of timing and I have Trinity stage 4 pipes Not sure on your setup, but I know the 4 mils w/ stock jugs like 162-172 mains, 48 pilots. Most cub cylinders like 148-155 mains, 45 pilots. So your guess is as good as mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.