chetgoff Posted February 24, 2010 Report Share Posted February 24, 2010 ok guy's need a quick answer. which way does the stock head gasket go . got a new one today and it doesn't say on it. around the cylinders one end has a raised lip in it woul that go up or down? Quote Link to comment Share on other sites More sharing options...
sketch2 Posted February 25, 2010 Report Share Posted February 25, 2010 ok guy's need a quick answer. which way does the stock head gasket go . got a new one today and it doesn't say on it. around the cylinders one end has a raised lip in it woul that go up or down? The very edge of the raised lip toward the inner of the cylinder should go facing up, alot of the gaskits tell you "UP" how wierd that your doesnt Quote Link to comment Share on other sites More sharing options...
blowit Posted February 25, 2010 Report Share Posted February 25, 2010 The "up" is stamped into the gasket, not printed. It does not exactly jump out at you. However, they can be flopped without any major concern. I would not pull one just to flip it. Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted February 25, 2010 Report Share Posted February 25, 2010 ok guy's need a quick answer. which way does the stock head gasket go . got a new one today and it doesn't say on it. around the cylinders one end has a raised lip in it woul that go up or down? Ive also came across headgaskets for the shee that dont have up stamped on them or any indication of what way is up, that leads me to believe that it does not matter. Quote Link to comment Share on other sites More sharing options...
chetgoff Posted February 25, 2010 Author Report Share Posted February 25, 2010 thanks for all the quick response this site is awesome with great help. THANKS ALOT GUY"S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.