375hp banshees Posted January 31, 2010 Report Share Posted January 31, 2010 do your research http://bansheehq.com/forums/index.php?showtopic=77843 Quote Link to comment Share on other sites More sharing options...
dco3100 Posted January 31, 2010 Report Share Posted January 31, 2010 the skeletons are comin out... Quote Link to comment Share on other sites More sharing options...
banshee-mike Posted February 5, 2010 Report Share Posted February 5, 2010 ill chime in on this,im the one he ended up selling them to.i received them in good shape,packaged very nice,unpolished but in my likings.im new to this whole banshee shit so dont know alot about it.i received the pipes on friday last week i put them on and ordered some exchaust clamps for them.well when the clamps arrived they wouldnt fit because the pipes were bb and not sb like he told me they were through pm.i contacted Mr bansheeracer9 and told him about the problem.he said blah blah blah,basicaly tried to say he didnt know they were bb.ya wtf,how do you not know what pipe your running.he refused to make it right, so ya im pissed.i have 450 dollars tied up into some pipes i cant use because this fucking d-bag!another thing that pisses me off is the fucking picture he used to sell the pipes, wasnt even the picture of the pipes he was seling.watch out for this fucking Duesh Bag! Quote Link to comment Share on other sites More sharing options...
DallasGDub Posted February 5, 2010 Report Share Posted February 5, 2010 Wow. This took a turn. I guess the orig poster was the lucky one after all. Sorry to hear that mike. The BB is still a good selling pipe. You might be able sale it again. Quote Link to comment Share on other sites More sharing options...
- DUNNY - Posted February 6, 2010 Report Share Posted February 6, 2010 ill chime in on this,im the one he ended up selling them to.i received them in good shape,packaged very nice,unpolished but in my likings.im new to this whole banshee shit so dont know alot about it.i received the pipes on friday last week i put them on and ordered some exchaust clamps for them.well when the clamps arrived they wouldnt fit because the pipes were bb and not sb like he told me they were through pm.i contacted Mr bansheeracer9 and told him about the problem.he said blah blah blah,basicaly tried to say he didnt know they were bb.ya wtf,how do you not know what pipe your running.he refused to make it right, so ya im pissed.i have 450 dollars tied up into some pipes i cant use because this fucking d-bag!another thing that pisses me off is the fucking picture he used to sell the pipes, wasnt even the picture of the pipes he was seling.watch out for this fucking Duesh Bag! did you test the pipes out? to see how they perform?, from what i hear from some people, is that they actually prefer running the big bore cpi or shearers on there smaller bore banshee's, they say the power comes on sooner and pulls longer. but i dont know if its true or not. Quote Link to comment Share on other sites More sharing options...
banshee-mike Posted February 6, 2010 Report Share Posted February 6, 2010 did you test the pipes out? to see how they perform?, from what i hear from some people, is that they actually prefer running the big bore cpi or shearers on there smaller bore banshee's, they say the power comes on sooner and pulls longer. but i dont know if its true or not. i did put them on and it ran like shit,no bottom at all,a hard mid and no top.was going to try and tune it in until i found out they were bb.a couple big name people told me that pipe wouldnt run well with my motor. Quote Link to comment Share on other sites More sharing options...
- DUNNY - Posted February 6, 2010 Report Share Posted February 6, 2010 i did put them on and it ran like shit,no bottom at all,a hard mid and no top.was going to try and tune it in until i found out they were bb.a couple big name people told me that pipe wouldnt run well with my motor. how do you tell if they are big bore, isnt the stinger tube larger? i just bought a set of cpi so i thought i should check them out before i throw them on. Quote Link to comment Share on other sites More sharing options...
banshee-mike Posted February 7, 2010 Report Share Posted February 7, 2010 how do you tell if they are big bore, isnt the stinger tube larger? i just bought a set of cpi so i thought i should check them out before i throw them on. the diff is the size of the header pipe where it goes into the stinger,bb is 1 1/8 and sb is 1 in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.