Jump to content

how do i fix it?


thbanshee81

Recommended Posts

make sure your carbs are in sync,float heights the same, idle screws are the same w/o tors switch,2 turns out on air screws,check compression,could also be right side crankshaft seal going bad. really need too know more about your mods if any.good idea to check your trans oil level.sounds more like carb problem though.

Link to comment
Share on other sites

As the above poster said, it is most likely a carb synch issue, or they could just be dirty. Also, ameks ure the carb bowls aren't swapped side to side, they are unique. The one on the side with the choke knob will have a tiny brass jet at the bottom. This will also cause this problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...