Fast-Fibers Posted January 13, 2010 Report Share Posted January 13, 2010 The stock frame Draggin Glass molds are finally done! These will be $300 shipped including the stainless grille. Let me know what you guys think Quote Link to comment Share on other sites More sharing options...
kubitza123 Posted January 13, 2010 Report Share Posted January 13, 2010 They look great. Many pin holes? they look much better than previous barnguys Quote Link to comment Share on other sites More sharing options...
Fast-Fibers Posted January 13, 2010 Author Report Share Posted January 13, 2010 I polished all of the molds and these things look really good. No pin holes, basically scuff and paint! Quote Link to comment Share on other sites More sharing options...
Fast-Fibers Posted January 14, 2010 Author Report Share Posted January 14, 2010 Bump... Looking for all feedback, positive or negative guys Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted January 14, 2010 Report Share Posted January 14, 2010 They look pretty sweet man great job. What is the weight on them, close to stock? Quote Link to comment Share on other sites More sharing options...
Fast-Fibers Posted January 14, 2010 Author Report Share Posted January 14, 2010 They are very similar to the stock weight. I could do them lighter but you run into problems with them vibrating apart if they are too thin. Quote Link to comment Share on other sites More sharing options...
rubberneck Posted January 14, 2010 Report Share Posted January 14, 2010 On my list of stuff to get. Do you have a rear set to match Quote Link to comment Share on other sites More sharing options...
HOODWORKZ Posted January 14, 2010 Report Share Posted January 14, 2010 They look good..I think I would like them better if the grill cut out was larger ..good price also Quote Link to comment Share on other sites More sharing options...
Fast-Fibers Posted January 14, 2010 Author Report Share Posted January 14, 2010 I actually have 5 different styles or rear fenders, However because these started as drag only fenders the mid evil style is the only one that covers the fender mounts on the factory grab bar. The cut your own style will cover them as well and allows you to create your own unique fender. Rear fenders are $225 shipped however if you order both front and rear they are $400 with a closed front or $475 with an open front and stainless grille. I personally would have like the grille to be larger than it is, but because of the radius at the bottom of the face, they are as large as the can be without creating a gap between the grille and fiberglass. The openings are approximately 4"x 8" which is plenty for cooling purposes. The grilles are custom made for these fenders by JDS customs, and are mounted with all stainless hardware and include o-rings to prevent vibration and rattling. Quote Link to comment Share on other sites More sharing options...
rubberneck Posted January 15, 2010 Report Share Posted January 15, 2010 I actually have 5 different styles or rear fenders, However because these started as drag only fenders the mid evil style is the only one that covers the fender mounts on the factory grab bar. The cut your own style will cover them as well and allows you to create your own unique fender. Rear fenders are $225 shipped however if you order both front and rear they are $400 with a closed front or $475 with an open front and stainless grille. I personally would have like the grille to be larger than it is, but because of the radius at the bottom of the face, they are as large as the can be without creating a gap between the grille and fiberglass. The openings are approximately 4"x 8" which is plenty for cooling purposes. The grilles are custom made for these fenders by JDS customs, and are mounted with all stainless hardware and include o-rings to prevent vibration and rattling. Ok, cool, it is going on a drag bike with custom sub frame, so no mounts to be concerned with. Do you have some pics of the diff style rears? JD has a design he has done for me on a grille in the past, that i would like him to adapt to this hood. Will you sell the hood without the grille so i can just have him do me up a custom one? thanks phil Quote Link to comment Share on other sites More sharing options...
ban99 Posted January 15, 2010 Report Share Posted January 15, 2010 (edited) Nice product. Any thoughts or plans on doing these in carbon fiber with a gelcoat finish? Also think it would be cool if you formed a bump out for a temp. guage. Edited January 15, 2010 by ban99 Quote Link to comment Share on other sites More sharing options...
98_shee Posted January 15, 2010 Report Share Posted January 15, 2010 Looks good man. Do they have to be completely removed to get to the rad cap? Quote Link to comment Share on other sites More sharing options...
Fast-Fibers Posted January 15, 2010 Author Report Share Posted January 15, 2010 www.fast-fibers.com Here is a link to the website. Unfortunately like all other one piece fenders they do have to be removed to access the radiator cap. I have considered doing carbon fiber, but they are expensive to do and demand for full carbon fenders is just not high enough to produce them full time, also due to the complex shape there would have to be exposed seems. I however can do carbon inlays such as a carbon strip down the sides or the middle to incorporate into a paint scheme. As far as a gauge pod goes I could probably work that out if I had the gauge and an idea how you wanted to mount it. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted January 15, 2010 Report Share Posted January 15, 2010 nice product! I will be gettin ahold ya for a set when my chassis gets closer to being ready for plastics.... Quote Link to comment Share on other sites More sharing options...
quaddad817 Posted January 16, 2010 Report Share Posted January 16, 2010 Im getting mine next week! cant wait Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.