rocketracing Posted January 7, 2010 Report Share Posted January 7, 2010 This is for everyone who is bashing the porting service on ebay. It totally got blown out of text. I wasnt saying with just a little port work you can outrun a 4mil cub, but with the prodrag portwork the right carbs, clutch , head, timing, and pipes you can. I know because I have done it. But im sure the motor wasnt tuned properly. A fine tuned stock motor will outrun a nontuned cub motor anyday. That is a big misconception a lot of people have. They think you just bolt a motor on and it is supposed to run top notch and is isnt. That is what i was trying to get at. Quote Link to comment Share on other sites More sharing options...
drap660 Posted January 7, 2010 Report Share Posted January 7, 2010 Boost Bottle?? Quote Link to comment Share on other sites More sharing options...
quaddad817 Posted January 7, 2010 Report Share Posted January 7, 2010 so what your saying is one of your pro drag ported 350's set up properly will out run a 4mil cub that is not set up properly? WOW! thats impressive Quote Link to comment Share on other sites More sharing options...
XxMeltIcexX Posted January 7, 2010 Report Share Posted January 7, 2010 so what your saying is one of your pro drag ported 350's set up properly will out run a 4mil cub that is not set up properly? WOW! thats impressive Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted January 8, 2010 Report Share Posted January 8, 2010 man i hate to sound rude but it kinda sounds like you stuck your foot in your mouth "A fine tuned stock motor will outrun a nontuned cub motor anyday" Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted January 8, 2010 Report Share Posted January 8, 2010 I didn't read the posts or whatever you are talking about and I'm not going to look it up. But there's a lot of untuned 4 mil cubs running around that will get their asses kicked badly by a top notch 350 there's no doubt about it. There's some fast 350s stock cyls out there for sure. I don't know if Rockets stuff runs or not. Honestly I've seen as many untuned cubs that didn't really run that well as I have seen fast 350s. There are quite a few. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted January 8, 2010 Report Share Posted January 8, 2010 I beat cubs with a stock cylinder,im not going to say anyday but im not scared to run head up with one Quote Link to comment Share on other sites More sharing options...
rocketracing Posted January 9, 2010 Author Report Share Posted January 9, 2010 I beat cubs with a stock cylinder,im not going to say anyday but im not scared to run head up with one I really appreciate you guys having my back on this. There are alot of people out there that think that you have to pay someone 6 and 7 hundred dollars to port their motor in order to be able to compete, but they are wrong. But what it really boils down to is people taking advantage of others that dont really know any better. I am and was not knocking cub motors at all, They are hard to beat when they are tuned correctly, but at the same time for a lot less money you can be close, beside or infront of one. I have been building and porting for years and i've seen it done time and time again. Quote Link to comment Share on other sites More sharing options...
rocketracing Posted January 9, 2010 Author Report Share Posted January 9, 2010 so what your saying is one of your pro drag ported 350's set up properly will out run a 4mil cub that is not set up properly? WOW! thats impressive that's exactly what im saying Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted January 9, 2010 Report Share Posted January 9, 2010 There are literally hundreds of stock cyl bikes stock stroke that flat out haul the mail with the right dome, big carbs, pipes etc. I think its like saying a built small block chevy or ford with all the right stuff will not run with any big block motor even stock lincoln or oldsmobile motors we know that's not true. Quote Link to comment Share on other sites More sharing options...
jgeorge1974 Posted January 9, 2010 Report Share Posted January 9, 2010 Rocket porting service does excellent work. He just done a stock set of cylinders for me and they look great and it runs awesome. Just because they don't have the big name like others doesn't mean they don't do as good or better work than those big name places. So don't bash them until you try them Quote Link to comment Share on other sites More sharing options...
volcrano Posted January 9, 2010 Report Share Posted January 9, 2010 that's exactly what im saying uh dude-i dont think u got the point here.hes poking fun and its hilarious.what props are u giving urself saying that ur fine tuned machine would beat a cub that ran like a plug was out of it.ID SURE AS HELL HOPE SO!!!!!!!the only way u can state it right is your port and all the goods can beat a cub setup too and tuned as well as ur stock cylinder.can u make that claim???or claim that u can be close???i got a ported 4mil with the same bolt ons and compression as my buddies unported 421 and i could pull him by 1 bike when i had my cpis and 34mms.if he was ported my ass would have been toast-that bitch just grunts upon throttle.put up some numbers on dyno or something.prove here that u have a good product,the talking isnt going well,and i wont bash u because i have no reason to.im sure u do do good work.id like to see what u guys have to offer before spending money without proof of quality since these claims of beating shitty running cubs.. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 17, 2010 Report Share Posted January 17, 2010 Was this from that whole bansheeboyz post? Quote Link to comment Share on other sites More sharing options...
Koolguyson Posted January 18, 2010 Report Share Posted January 18, 2010 I really appreciate you guys having my back on this. There are alot of people out there that think that you have to pay someone 6 and 7 hundred dollars to port their motor in order to be able to compete, but they are wrong. But what it really boils down to is people taking advantage of others that dont really know any better. I am and was not knocking cub motors at all, They are hard to beat when they are tuned correctly, but at the same time for a lot less money you can be close, beside or infront of one. I have been building and porting for years and i've seen it done time and time again. You are in a sense doing the same thing. Claiming something that would be true for anybody else, while making yourself look good. That is like me saying "Hey, send your motor to me because I will charge you 50 dollars and you will outrun Rocket Racing's motors when they aren't set up right." Honestly who takes pride in beating somebody who isn't set up at least "close" to their potential. I am sure you are just trying to make a name for yourself, and you seem annoyingly nice (or naive). But I would word your listings better. Quote Link to comment Share on other sites More sharing options...
J-Madd Posted January 18, 2010 Report Share Posted January 18, 2010 Untuned Cubs still run pretty damn good, imo. Now with a bad setup (wrong gearing, wrong tires, swingarm, etc.) is a different story; but the Cubs still make power pig rich or a little lean. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.